schrodinger.application.jaguar.gui.tabs.input_tab module

class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase(parent, input_selector=None)

Bases: schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesStructuresMixin, schrodinger.application.jaguar.gui.tabs.base_tab.BaseTab

A tab for specifying settings for the structures currently selected in the project table. Note that this class is not intended to be directly instantiated. Instead, the InputTab or InputTabPka classes should be used.

Variables
  • MODEL_CLASS (schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesModel) – The class to use for the table model

  • PROXY_CLASS (schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesProxyModel) – The class to use for the table proxy model

  • VIEW_CLASS (schrodinger.application.jaguar.gui.input_tab_widgets. SelectedEntriesView) – The class to use for the table view

  • strucSourceChanged (QtCore.pyqtSignal) – A signal emitted when the structure source changes from included to selected or vice versa.

strucSourceChanged
NAME = 'Input'
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel

PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

setup()

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

projectUpdated()

When the project is updated, update the selected entries table

workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

loadSettings(jag_input)

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

validate()

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

reset()

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

useFromComboChanged()

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

getCurrentTableModel()

Get the current model, not the proxy model, for the input view

Return type

QtCore.QAbstractTableModel

Returns

The model the table is currently using

getAllTableModels()

Get all table models regardless of whether they are the currently the model for the table view or not. This allows supporting panels such as pKa that switch between multiple models depending on panel options.

The proxy model is not included.

Return type

list

Returns

A list of models usable by the table view

DrawChildren = 2
DrawWindowBackground = 1
HELP_TOPIC = ''
IgnoreMask = 4
MULTIPLE_STRUC_JOB_TITLE = 'batch'
class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
UI_MODULES = None
__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, a0: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
getDefaultKeywords()

Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.

getMmJagKeywords()

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, a0: QKeyEvent)
keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(self, a0: QMouseEvent)
mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(self, a0: QMoveEvent)
moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
physicalDpiX(self) int
physicalDpiY(self) int
pos(self) QPoint
previousInFocusChain(self) QWidget
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(self, a0: QResizeEvent)
restoreGeometry(self, geometry: QByteArray) bool
saveGeometry(self) QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setDisabled(self, a0: bool)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setMouseTracking(self, enable: bool)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setProperty(self, name: str, value: Any) bool
setScreen(self, a0: QScreen)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
sharedPainter(self) QPainter
show(self)
showEvent(self, a0: QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
structureChanged
style(self) QStyle
styleSheet(self) str
tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
underMouse(self) bool
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
visibleRegion(self) QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
x(self) int
y(self) int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTab(parent, input_selector=None)

Bases: schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesTheoryMixin, schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesBasisMixin, schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase

An input tab that allows the user to specify basis sets.

HELP_TOPIC = 'JAGUAR_INPUT_TAB'
UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_top_ui' from '/scr/buildbot/savedbuilds/2023-4/NB/build-133/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_std_bottom_ui' from '/scr/buildbot/savedbuilds/2023-4/NB/build-133/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_std_bottom_ui.py'>)
setup()

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

getDefaultKeywords()

The mmjag default basis set is “”, which would cause a warning, so we set the default basis. Additionally, the mmjag default DFT functional name is “”, which would cause a HF level of theory. Instead, set a default functional of B3LYP-D3.

Returns

A keyword dictionary with the default basis set and functional.

Return type

dict

loadSettings(jag_input)

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

getBasis(mixed_name='Mixed')

Get the currently selected basis. If more than one basis set is specified, mixed_name will be returned. If the tab does not allow for specifying multiple basis sets, then this argument may be ignored.

Parameters

mixed_name (str) – The name to return if more than one basis set is specified

Returns

The currently selected basis

Return type

str

getTheoryLevel()

Get the current theory level

Returns

The current theory level.

Return type

str

getAllUsedTheoryLevels()
Returns

A tuple of all theory levels used

Return type

tuple

getMethod()

Get the current method.

Returns

The current method

Return type

str

getFunctional(cur_struc=None)

Get the current DFT functional.

Parameters

cur_struc (input_tab_widgets.ProjEntryTuple) – Current structure to get functional for. If not specified, functional will be returned based on default theory setting.

Returns

The current DFT functional

Return type

str or None

validate()

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

getCommonBasis()

If all structures use the same basis set, return the basis set name. Otherwise, return None.

Returns

The basis set name or None

Return type

str or NoneType

getCommonMethod()

If all structures use the same method, return the method name. Otherwise, return None.

Returns

The method name or None

Return type

str or NoneType

getCommonTheoryLevel()
Returns

If all current methods are of the same theory level, return the theory level. Otherwise return None.

Return type

str or None

chargedStrucsPresent()

Determine if the user has specified any molecular charges

Returns

True if the user has specified a molecular charge for any molecule. False otherwise.

Return type

bool

getBasisForEid(eid, per_atom_name)

Get the basis set for the specified entry id. If there are per-atom basis sets specified for the structure, the per_atom_name will be returned.

Parameters
  • eid (str) – The entry id

  • per_atom_name (str) – The name to return if per-atom basis sets are specified

Returns

The basis set name, or per_atom_name if per-atom basis sets are specified

Return type

Basis or str

getTheoryLevelForEid(eid)

Get the theory level for the specified entry ID.

Parameters

eid (int) – Entry ID to get theory level of.

Returns

Theory level for this entry ID.

Return type

str

getMethodForEid(eid)

Get the method for the specified entry ID.

Parameters

eid (int) – Entry ID to get method of.

Returns

Method for this entry ID.

Return type

str

DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesModel

MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
basis_changed
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, a0: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
getAllTableModels()

Get all table models regardless of whether they are the currently the model for the table view or not. This allows supporting panels such as pKa that switch between multiple models depending on panel options.

The proxy model is not included.

Return type

list

Returns

A list of models usable by the table view

getCommonFunctional()
Returns

If all entries use DFT and have the same functional set, return the functional. Otherwise return None.

Return type

str or None

getCurrentTableModel()

Get the current model, not the proxy model, for the input view

Return type

QtCore.QAbstractTableModel

Returns

The model the table is currently using

getMmJagKeywords()

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, a0: QKeyEvent)
keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
method_changed
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(self, a0: QMouseEvent)
mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(self, a0: QMoveEvent)
moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
physicalDpiX(self) int
physicalDpiY(self) int
pos(self) QPoint
previousInFocusChain(self) QWidget
projectUpdated()

When the project is updated, update the selected entries table

property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
reset()

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(self, a0: QResizeEvent)
restoreGeometry(self, geometry: QByteArray) bool
saveGeometry(self) QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setDisabled(self, a0: bool)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setMouseTracking(self, enable: bool)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setProperty(self, name: str, value: Any) bool
setScreen(self, a0: QScreen)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
sharedPainter(self) QPainter
show(self)
showEvent(self, a0: QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
strucSourceChanged
structureChanged
style(self) QStyle
styleSheet(self) str
tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
underMouse(self) bool
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
useFromComboChanged()

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

visibleRegion(self) QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

x(self) int
y(self) int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabPka(parent, input_selector=None)

Bases: schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase

An input tab that allows the user to specify pKa atoms.

Variables
  • set_pka_marker (PyQt5.QtCore.pyqtSignal) –

    A signal emitted when a new pKa atom should be marked in the workspace. Emitted with two arguments:

  • remove_all_pka_markers (PyQt5.QtCore.pyqtSignal) – A signal emitted when the panel is reset and should thus remove all markers from the workspace.

HELP_TOPIC = 'JAGUAR_INPUT_TAB'
UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_pka_top_ui' from '/scr/buildbot/savedbuilds/2023-4/NB/build-133/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_pka_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_pka_bottom_ui' from '/scr/buildbot/savedbuilds/2023-4/NB/build-133/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_pka_bottom_ui.py'>)
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets_pka.InputEntriesModelPka

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets_pka.InputEntriesViewPka

set_pka_marker
remove_all_pka_markers
SMARTS = 'SMARTS'
SMARTS_TOOLTIP = ''
AUTO = 'Automatic search'
AUTO_TOOLTIP = 'Application will attempt to locate all pKa atoms in all structures.\nStructures must be in the appropriate protonation form.\nNote that this search is not perfect and may miss some atoms or include others erroneously.'
SELECTION_MICRO_TEXT = 'pKa predictions will run on all structures listed below. The pKa atom must be defined for each structure. Optionally choose an alternate method for identifying these atoms below.'
SELECTION_MACRO_TEXT = 'Macro-pKa predictions will run on all structures listed below. The pKa atom will be automatically defined for each structure.'
PKA = 'pKa'
CHARGE = 'Relative Charge'
setup()

Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.

isMacroPka()

Whether the current panel mode is Macro-pKa

Return type

bool

Returns

True if the panel mode is Macro, False if it is Micro

isRangePka()

Whether the Macro-pKa mode range is for pKa

Return type

bool

Returns

True if the Macro range is pKa, False if it is relative charge

swapInSourceModel(source)

Change the source model for the table view to the given model

Parameters

source (QtCore.QAbstractTableModel) – The model to use

setPkaMarkers(*args, **kwargs)

Turn on workspace atom markers if the sending model is the current table model - ignore signals from other models

updateForRangeType(rtype)

React to a change in which Macro-pKa range type is used

Parameters

rtype (str) – The new range type

updateRelativeChargeInfo()

Update the label that informs the user about relative charges

updateForMethod(micro)

React to the panel changing between micro and macro mode

Parameters

micro (bool) – True if the panel is in micro mode, False if in macro mode

onFindCheckToggled(state)

If checked, disable editing of pka atom and enable combobox for choosing of pick mode. Update model to reflect new pick mode. Show smarts selector if new picking mode is SMARTS.

Parameters

state (bool) – If checkbox is checked or not

onPickModeComboChanged()

Update model to reflect new pick mode. Show smarts selector if new picking mode is SMARTS.

onPickModeChanged()

Update the model to reflect the new pick mode. If its SMARTS show and hide the define label and connect signals.

showDefineButton()

Show the define label

hideDefineButton()

Hide the define label

getPickingMode()

Determine the current picking mode the tab is in

Returns

picking mode

Return type

input_tab_widgets_pka.PickingModes

runSmartsSearch()

Run SMARTS searches on the entries in the entry table if the pick mode is SMARTS

getMmJagKeywords()

Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.

Returns

All keywords that should be put into the mmjag handle

Return type

dict

Raises

schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.

isZwitterionChecked()
isConformationalSearchesChecked()
validate()

Make sure that the tab settings will allow a job to be run successfully. Note that this validation should not be redundant with that performed in getMmJagKeywords. Any tab setting that prevents valid mmjag keywords from being generated should cause getMmJagKeywords to raise a JaguarSettingError. Any tab setting that allows mmjag keywords to be successfully generated but will result in a job failure should cause a validate fail. This function should be defined in subclasses if validation is needed.

Returns

If the validation passes, None is returned. If the validation fails, a string that describes the error is returned.

Return type

str or NoneType

validateMacroSettings()

Validate any Macro-pKa settings on the input tab

Return type

str or None

Returns

An error message, or None if there are no issues

validateMicroSettings()

Validate any Macro-pKa settings on the input tab

Return type

str or None

Returns

An error message, or None if there are no issues

loadSettings(jag_input)

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

loadWorkflowSettings(workflow_input, eid)

Load workflow settings from the input file

Parameters
  • workflow_input (schrodinger.application.jaguar.workflow_input) – The workflow input object created from the input file

  • eid (str or None) – The entry ID of structure that was loaded during this read. If None, the settings are not associated with an entry.

setPickMethodToManual()
setPickMethodToAuto()
reset()

Reset any structure specific settings in the table. (The non-struture specific settings will be reset via loadSettings())

getAllTableModels()

Get all table models regardless of whether they are the currently the model for the table view or not.

Return type

list

Returns

A list of models usable by the table view

DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, a0: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
getCurrentTableModel()

Get the current model, not the proxy model, for the input view

Return type

QtCore.QAbstractTableModel

Returns

The model the table is currently using

getDefaultKeywords()

Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, a0: QKeyEvent)
keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
loadPerAtomSettings(jag_input, eid=None, title=None)

Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.

Parameters
locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(self, a0: QMouseEvent)
mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(self, a0: QMoveEvent)
moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
physicalDpiX(self) int
physicalDpiY(self) int
pos(self) QPoint
previousInFocusChain(self) QWidget
projectUpdated()

When the project is updated, update the selected entries table

property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(self, a0: QResizeEvent)
restoreGeometry(self, geometry: QByteArray) bool
saveGeometry(self) QByteArray
saveSettings(jag_input, eid)

Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.

Parameters
screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setDisabled(self, a0: bool)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setMouseTracking(self, enable: bool)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setProperty(self, name: str, value: Any) bool
setScreen(self, a0: QScreen)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
sharedPainter(self) QPainter
show(self)
showEvent(self, a0: QShowEvent)
showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
strucSourceChanged
structureChanged
style(self) QStyle
styleSheet(self) str
tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
underMouse(self) bool
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
useFromComboChanged()

Respond to the user changing the structure source (from included to selected or vice versa).

usingSelected()

Return True if the tab is set to use selected entries. False if the tab is set to use included entries.

visibleRegion(self) QRegion
warning(msg)

Display a warning dialog with the specified message

Parameters

msg (str) – The message to include in the warning dialog

whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
workspaceChanged(what_changed)

Update the table whenever the workspace changes in case the user changed the charge of a molecule.

Parameters

what_changed (str) – A flag indicating what changed in the workspace

x(self) int
y(self) int
class schrodinger.application.jaguar.gui.tabs.input_tab.InputTabHB(parent, input_selector=None)

Bases: schrodinger.application.jaguar.gui.tabs.input_tab.InputTabBase

An input tab that is used with Hydrogen Bond task.

HELP_TOPIC = 'JAGUAR_HYDROGEN_BOND'
UI_MODULES = (<module 'schrodinger.application.jaguar.gui.ui.input_hb_top_ui' from '/scr/buildbot/savedbuilds/2023-4/NB/build-133/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_hb_top_ui.py'>, <module 'schrodinger.application.jaguar.gui.ui.input_hb_bottom_ui' from '/scr/buildbot/savedbuilds/2023-4/NB/build-133/internal/lib/python3.8/site-packages/schrodinger/application/jaguar/gui/ui/input_hb_bottom_ui.py'>)
MODEL_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets_hb.InputEntriesModelHB

VIEW_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesView

getMmJagKeywords()

There are no jaguar handle keywords that this tab sets, but we need this function to override the one in the base class.

loadSettings(jag_input)

Restore tab settings from mmjag keywords. This function should be defined in subclasses.

Parameters

jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on

isFastMode()

This function return True if ‘Fast Mode’ check box is checked.

Returns

True if ‘Fast Mode’ check box is toggled.

Return type

bool

getOptimizationCmd()

This function returns command argument corresponding to the checked optimization option. If ‘Optimize all structure’ option is selected this function returns None.

Returns

optimization command argument

Return type

string or None

reset()

This function resets optimization and ‘fast mode’ settings to default state. This function needs to be called every time when input file is loaded.

DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
MULTIPLE_STRUC_JOB_TITLE = 'batch'
NAME = 'Input'
PROXY_CLASS

alias of schrodinger.application.jaguar.gui.input_tab_widgets.InputEntriesProxyModel

class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
__init__(parent, input_selector=None)

Perform common tab initialization. All tab specific initialization should go in setup().

Parameters
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activate()

This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.

activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
deactivate()

This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.

deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
error(msg)

Display an error dialog with the specified message

Parameters

msg (str) – The message to include in the error dialog

event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, a0: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
getAllTableModels()

Get all table models regardless of whether they are the currently the model for the table view or not. This allows supporting panels such as pKa that switch between multiple models depending on panel options.

The proxy model is not included.

Return type

list

Returns

A list of models usable by the table view

getCurrentTableModel()

Get the current model, not the proxy model, for the input view

Return type

QtCore.QAbstractTableModel

Returns

The model the table is currently using

getDefaultKeywords()

Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.

getNumStructures()
getStructureTitleForJobname()

Get the structure title to be used in the job name. If the tab includes multiple structures, then MULTIPLE_STRUC_JOB_TITLE should be returned. If no structures have been specified yet, then None should be returned.

Returns

The structure title

Return type

str or NoneType

getStructures()

Get all structures loaded into the tab and their associated Jaguar settings

Returns

A list of tuples. Each tuple represents a single structure and contains:

Return type

list

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool