schrodinger.application.livedesign.tasks module

LiveDesign protocol tasks.

Copyright Schrodinger, LLC. All rights reserved.

schrodinger.application.livedesign.tasks.run_task(task, task_type)

Check the task to see if it completed successfully. Will raise a RuntimeError if the job failed or a FileNotFoundError is the output file does not exist

Parameters

• task ('schrodinger.tasks.jobtasks.CmdJobTask') – job_utils task object

• task_type (str) – Calculation performed by the task

class schrodinger.application.livedesign.tasks.LigPrepTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a LigPrep task using in the input, output and job settings

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

ligprep_infile: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

ligprep_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

ligprep_argsChanged

ligprep_argsReplaced

ligprep_infileChanged

ligprep_infileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

dropped_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dropped_fileChanged

dropped_fileReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, ligprep_args=None, ligprep_infile=None, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.LigFilterTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a LigFilter task using in the input, output and job settings

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

filter_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

filter_fileChanged

filter_fileReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, filter_file, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.GlideTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a Glide task using in the input, output and job settings

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

grid_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

glide_infile: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

num_poses: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

ref_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

report_strain_energy: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

use_confgenx: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

mcs_timeout_no_skip: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

opls: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

glide_infileChanged

glide_infileReplaced

grid_fileChanged

grid_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

mcs_timeout_no_skipChanged

mcs_timeout_no_skipReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

num_posesChanged

num_posesReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

oplsChanged

oplsReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

ref_fileChanged

ref_fileReplaced

removeEventFilter(self, a0: QObject)

report_strain_energyChanged

report_strain_energyReplaced

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

use_confgenxChanged

use_confgenxReplaced

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

csv_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

parsed_inp_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

skip_csv: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

keyword_dict: dict

A Param to represent dictionaries. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a value_class keyword argument to specify what type of class the values will be. This information will be used for jsonifying the dictionary if specified. (Note that non-string keys are not currently supported for jsonification. This may change in the future. See PANEL-13029).

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

csv_fileChanged

csv_fileReplaced

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

keyword_dictChanged

keyword_dictReplaced

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

parsed_inp_fileChanged

parsed_inp_fileReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_csvChanged

skip_csvReplaced

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

FormatInpFile()

Parse the Glide input file and combine command line arguments and Glide defaults into a final validated Glide input file

classmethod create_task(task_name, ligands_file, grid_file, glide_infile, num_poses, ref_file=None, report_strain_energy=None, use_confgenx=None, mcs_timeout_no_skip=None, opls=None, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.AlignLigandsTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create an align_ligands task using in the input, output and job settings. The alignment_args is a list of arguments that align_ligands takes

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

alignment_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

alignment_argsChanged

alignment_argsReplaced

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, alignment_args, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

Subclass JobConfig to customize what job settings are available for a given jobtask. To disable an option, set an ordinary (non-param) class variable with value None for that option.

Subclasses may add any arbitrary options as desired; it is the responsibility of the task to handle those options.

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.FlexAlignTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a flex_align task using in the input, output and job settings. The alignment_args is a list of arguments that align_ligands takes

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

refligs_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

flex_align_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

flex_align_argsChanged

flex_align_argsReplaced

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

refligs_fileChanged

refligs_fileReplaced

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, refligs_file, flex_align_args, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

Subclass JobConfig to customize what job settings are available for a given jobtask. To disable an option, set an ordinary (non-param) class variable with value None for that option.

Subclasses may add any arbitrary options as desired; it is the responsibility of the task to handle those options.

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.TugAlignTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a tug_align task using in the input, output and job settings

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

ref_ligand_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

tug_align_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

ref_ligand_fileChanged

ref_ligand_fileReplaced

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

tug_align_argsChanged

tug_align_argsReplaced

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, ref_ligand_file, tug_align_args=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

Subclass JobConfig to customize what job settings are available for a given jobtask. To disable an option, set an ordinary (non-param) class variable with value None for that option.

Subclasses may add any arbitrary options as desired; it is the responsibility of the task to handle those options.

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.EpikClassicTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create an Epik Classic task using in the input, output and job settings

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

epik_classic_infile: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

epik_classic_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

epik_classic_argsChanged

epik_classic_argsReplaced

epik_classic_infileChanged

epik_classic_infileReplaced

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, epik_classic_args=None, epik_classic_infile=None, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.EpikTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create an Epik task using in the input, output and job settings

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

mode: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

epik_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

epik_argsChanged

epik_argsReplaced

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

modeChanged

modeReplaced

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, epik_args, mode, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.QikPropTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a QikProp task using in the input, output and job settings

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

qp_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

qp_argsChanged

qp_argsReplaced

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

mae_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

qp_out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

qp_csv_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

qp_qpsa_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_fileChanged

log_fileReplaced

mae_fileChanged

mae_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

qp_csv_fileChanged

qp_csv_fileReplaced

qp_out_fileChanged

qp_out_fileReplaced

qp_qpsa_fileChanged

qp_qpsa_fileReplaced

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, qp_args, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.MemPermTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a Prime Membrane Permeability task using in the input, output and job settings

sub_log_file

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

csv_file

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

permeability_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

permeability_argsChanged

permeability_argsReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

sub_log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

csv_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

csv_fileChanged

csv_fileReplaced

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

sub_log_fileChanged

sub_log_fileReplaced

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, permeability_args=None, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.CanvasSearchTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a canvasSearch task using in the input, output and job settings

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

rule_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

rule_fileChanged

rule_fileReplaced

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

counts_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

counts_fileChanged

counts_fileReplaced

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligands_file, rule_file, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.CovDockTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a canvasSearch task using in the input, output and job settings

parser

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

cdock

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

covdock_opts

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

multi_value_keywords

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

class JobConfig(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.JobConfig

driver_host_settings: schrodinger.tasks.jobtasks.HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

driver_host_settingsChanged

driver_host_settingsReplaced

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

host_settings: HostSettings

Variables

HOST_PLACEHOLDER_ARGS – Placeholders to pass into the -HOST argument when no host is available based on the currently allowed host types.

host_settingsChanged

host_settingsReplaced

incorporation = None

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

jobname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

jobnameChanged

jobnameReplaced

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

viewname: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

viewnameChanged

viewnameReplaced

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligands_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

receptor_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

covdock_inp_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

cons_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

ref_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

cdock_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

reaction_type: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

num_poses: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

core_constraint_smarts: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

core_rmsd: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

macrocycle: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

cdock_fileChanged

cdock_fileReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

cons_fileChanged

cons_fileReplaced

core_constraint_smartsChanged

core_constraint_smartsReplaced

core_rmsdChanged

core_rmsdReplaced

covdock_inp_fileChanged

covdock_inp_fileReplaced

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligands_fileChanged

ligands_fileReplaced

macrocycleChanged

macrocycleReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

num_posesChanged

num_posesReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

reaction_typeChanged

reaction_typeReplaced

receivers(self, signal: PYQT_SIGNAL) → int

receptor_fileChanged

receptor_fileReplaced

ref_fileChanged

ref_fileReplaced

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

parsed_inp_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

grid_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

grid_fileChanged

grid_fileReplaced

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

parsed_inp_fileChanged

parsed_inp_fileReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

CreateInpFile()

Parse the CovDock input file, updating the settings and write a new inp file

classmethod create_task(task_name, ligands_file, receptor_file, covdock_inp_file, reaction_type, num_poses, cons_file, ref_file, cdock_file, core_constraint_smarts, core_rmsd, macrocycle, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.PrimeMMGBSATask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a prime_mmgbsa task using in the input, output and job settings. The prime_mmgbsa_args is a list of arguments that prime_mmgbsa takes

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

pv_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

prime_mmgbsa_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

watermap: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

flexdist: float

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

ntop_poses: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

flexdistChanged

flexdistReplaced

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

ntop_posesChanged

ntop_posesReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

prime_mmgbsa_argsChanged

prime_mmgbsa_argsReplaced

property(self, name: str) → Any

pv_fileChanged

pv_fileReplaced

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

watermapChanged

watermapReplaced

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, pv_file, watermap, flexdist, ntop_poses, prime_mmgbsa_args, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

Subclass JobConfig to customize what job settings are available for a given jobtask. To disable an option, set an ordinary (non-param) class variable with value None for that option.

Subclasses may add any arbitrary options as desired; it is the responsibility of the task to handle those options.

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.LigandStrainTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a ligand_strain task using in the input, output and job settings. The ligand_strain_args is a list of arguments that ligand_strain takes

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligand_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

ligand_strain_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligand_fileChanged

ligand_fileReplaced

ligand_strain_argsChanged

ligand_strain_argsReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

log_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligand_file, ligand_strain_args, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

Subclass JobConfig to customize what job settings are available for a given jobtask. To disable an option, set an ordinary (non-param) class variable with value None for that option.

Subclasses may add any arbitrary options as desired; it is the responsibility of the task to handle those options.

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()

class schrodinger.application.livedesign.tasks.StrainRescoreTask(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks.CmdJobTask

Create a StrainRescore task using in the input, output and job settings. The strain_rescore_args is a list of arguments that strain_rescore.py takes

class Input(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.models.parameters.CompoundParam

ligand_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

strain_rescore_args: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

ligand_fileChanged

ligand_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

strain_rescore_argsChanged

strain_rescore_argsReplaced

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

class Output(*args, _param_type=<object object>, **kwargs)

Bases: schrodinger.tasks.jobtasks._CmdJobTaskOutput

out_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

local_st_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

global_st_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

log_file: schrodinger.tasks.tasks.TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

__init__(default_value=<object object>, _param_type=<object object>, **kwargs)

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

global_st_fileChanged

global_st_fileReplaced

incorporation_file: TaskFile

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

incorporation_fileChanged

incorporation_fileReplaced

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault()

Whether the current value of this instance matches the default value.

isSignalConnected(self, signal: QMetaMethod) → bool

isWidgetType(self) → bool

isWindowType(self) → bool

killTimer(self, id: int)

local_st_fileChanged

local_st_fileReplaced

log_fileChanged

log_fileReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

out_fileChanged

out_fileReplaced

output_files: List[TaskFile]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

output_filesChanged

output_filesReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

reset(*abstract_params)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

sender(self) → QObject

senderSignalIndex(self) → int

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

setOutputPaths()

classmethod create_task(task_name, ligand_file, strain_rescore_args, hostname=None, num_subjobs=None, task_dir=None)

makeCmd()

@overrides: tasks.AbstractCmdTask

Child classes must override.

AUTO_TASKDIR = 1

CMDLINE = 1

DEFAULT_TASKDIR_SETTING = None

DONE = 3

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

FAILED = 2

GUI = 2

INTERRUPT_ENABLED = False

property PROGRAM_NAME

RUNNING = 1

TEMP_TASKDIR = 2

WAITING = 0

__init__(*args, **kwargs)

addFuncToGroup(func, group=None, order=None)

Adds a function to the specified chain. Typically used for adding functions that are not methods of this object.

The function may optionally be decorated with a FuncGroupMarker. If so, the default group and order will be determined by the decorator. Any group or order explicitly passed in to addFuncToGroup will take precedence over the decorator settings.

Parameters

• func – the function to add

• group (FuncGroupMarker or None) – the group marker. If the function is decorated with a FuncGoupMarker, that group marker will be the default.

• order (float or None) – the sorting order. If the function is decorated with a FuncGoupMarker, the order specified in the decorator will be the default.

addLicenseReservation(license, num_tokens=1)

Add a license reservation for this job. This information is used by job control to ensure the job is only started once the required licenses become available.

In a preprocessor, (i.e. before launching the backend), a reservation should be added for each license that will be checked out directly by that backend. Example:

class GlideTask(ComboJobTask):

    @preprocessor
    def _reserveGlideLicense(self):
        # Reserve a Glide license.
        self.addLicenseReservation(license.GLIDE_MAIN)

    def mainFunction(self):
        # Check out the Glide license
        lic = license.License(license.GLIDE_MAIN)

        # ... Do computations requiring Glide ...

        lic.checkin()

Licenses that will be checked out by subjobs of this job do not need reservations added here; subjobs are responsible for their own license reservations.

Parameters

• license (module-constant from schrodinger.utils.license (e.g. license.AUTODESIGNER)) – a license that will be used by the backend

• num_tokens (int) – number of tokens for this license reservations

addPostprocessor(func, order=0)

Adds a postproceessor function to this task instance. If the function has been decorated with @postprocessor, the order specified by the decorator will be used.

Parameters

• func (typing.Callable) – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

addPreprocessor(func, order=None)

Adds a preproceessor function to this task instance. If the function has been decorated with @preprocessor, the order specified by the decorator will be used as the default.

Parameters

• func – the function to add

• order (float) – the sorting order for the function relative to all other preprocessors. Takes precedence over order specified by the preprocessor decorator.

classmethod addSubParam(name, param, update_owner=True)

blockSignals(self, b: bool) → bool

block_signal_propagation()

calling_context: CallingContext

calling_contextChanged

calling_contextReplaced

childEvent(self, a0: QChildEvent)

children(self) → List[QObject]

classmethod configToJobConfigAdapter(json_dict)

classmethod configureParam()

@overrides: parameters.CompoundParam

connectNotify(self, signal: QMetaMethod)

customEvent(self, a0: QEvent)

classmethod defaultValue()

Returns the default value for this abstract param:

default_atom = Atom.defaultValue()
assert Atom.coord.x == 0

deleteLater(self)

destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) → bool

disconnect(self) → None

disconnectNotify(self, signal: QMetaMethod)

dumpObjectInfo(self)

dumpObjectTree(self)

dynamicPropertyNames(self) → List[QByteArray]

event(self, a0: QEvent) → bool

eventFilter(self, a0: QObject, a1: QEvent) → bool

failure_info: FailureInfo

Dataclass for task failure information.

Printing an instance of this class will provide the minimum necessary human-readable representation of a recorded failure.

failure_infoChanged

failure_infoReplaced

findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → QObject

findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) → List[QObject]

classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonFilename(filename)

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam()

Return the corresponding abstract param for this instance.

getAddedFuncs(group=None)

getDebugString()

getFuncGroup(group=None)

Retrieve the functions belonging to the specified group.

Parameters

group (FuncGroupMarker) – the group marker

Returns

the functions in the specified group, in order

Return type

list

getJob() → Optional[schrodinger.job.jobcontrol.Job]

classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(obj, signal_type='Changed')

classmethod getParamValue(obj)

Enables access to a param value on a compound param via an abstract param reference:

a = Atom()
assert Atom.coord.x.getParamValue(a) == 0 # ints default to 0
a.coord.x = 3
assert Atom.coord.x.getParamValue(a) == 3

Parameters

param (CompoundParam) – The owner param to get a param value from

getShFilename()

classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTaskDir()

Returns the full path of the task directory. This is only available if the task directory exists (after creation of the taskdir or, if no task dir is specified, any time).

getTaskFilename(fname)

Return the appropriate absolute path for an input or output file in the taskdir.

getTypeHint()

get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

guard()

Context manager that saves any Exception raised inside

inWriteMode()

inherits(self, classname: str) → bool

initAbstract()

initConcrete()

Override to customize initialization of concrete params.

initializeValue()

@overrides: paramters.CompoundParam

input: schrodinger.models.parameters.CompoundParam

inputChanged

inputReplaced

installEventFilter(self, a0: QObject)

classmethod isAbstract()

Whether the param is an “abstract” param.

isDebugEnabled()

isDefault()

Whether the current value of this instance matches the default value.

isInterruptionRequested()

isRunning()

isSignalConnected(self, signal: QMetaMethod) → bool

isStartable()

isWidgetType(self) → bool

isWindowType(self) → bool

job_config: schrodinger.tasks.jobtasks.JobConfig

Subclass JobConfig to customize what job settings are available for a given jobtask. To disable an option, set an ordinary (non-param) class variable with value None for that option.

Subclasses may add any arbitrary options as desired; it is the responsibility of the task to handle those options.

job_configChanged

job_configReplaced

job_id

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error

kill()

@overrides: tasks.AbstractTask

killTimer(self, id: int)

max_progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

max_progressChanged

max_progressReplaced

metaObject(self) → QMetaObject

moveToThread(self, thread: QThread)

name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

nameChanged

nameReplaced

objectName(self) → str

objectNameChanged

objectNameChanged(self, objectName: str) [signal]

output: parameters.CompoundParam

outputChanged

outputReplaced

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a

classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'

parent(self) → QObject

postprocessors()

Returns

A list of postprocessors, both decorated methods on the task and external functions that have been added via addPostprocessor()

Return type

list[typing.Callable]

preprocessors()

Returns

A list of preprocessors (both decorated methods on the task and external functions that have been added via addPreprocessor)

printDebug(*args)

processFuncChain(chain=None, result_callback=None)

Execute each function in the specified chain sequentially in order.

The result_callback is called after each function with the return value of that function. This can be used to respond to the return value (e.g. present information to the user, get user feedback, log the result, etc.)

The return value of the result_callback determines whether processing will proceeed to the next function.

Parameters

• chain (FuncChainDecorator) – which chain to process

• result_callback – the callback that will get called with the result of each function in the chain

Returns

a list of the results from the functions

progress: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progressChanged

progressReplaced

progress_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str

progress_stringChanged

progress_stringReplaced

property(self, name: str) → Any

pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) → int

removeEventFilter(self, a0: QObject)

replicate()

@overrides: tasks.AbstractTask

requestInterruption()

Request the task to stop.

To enable this feature, subclasses should periodically check whether an interruption has been requested and terminate if it has been. If such logic has been included, INTERRUPT_ENABLED should be set to True.

reset(*args, **kwargs)

Resets this compound param to its default value:

class Line(CompoundParam):
    start = Coord(x=1, y=2)
    end = Coord(x=4, y=5)
line = Line()
line.start.x = line.end.x = 10
assert line.start.x == line.end.x == 10
line.reset()
assert line.start.x == 1
assert line.end.x == 4

Any number of abstract params may be passed in to perform a partial reset of only the specified params:

line.start.x = line.end.x = 10
line.reset(Line.start.x)  # resets just start.x
assert line.start.x == 1
assert line.end.x == 10

line.reset(Line.end)      # resets the entire end point
assert line.end.x == 4

line.start.y = line.end.y = 10
line.reset(Line.start.y, Line.end.y)  # resets the y-coord of both
assert line.start.y == 2
assert line.end.y == 5

run()

runCmd(cmd)

@overrides: tasks.AbstractCmdTask

runPreprocessing(callback=None, calling_context=None)

Run the preprocessors one-by-one. By default, any failing preprocessor will raise a TaskFailure exception and terminate processing. This behavior may be customized by supplying a callback function which will be called after each preprocessor with the result of that preprocessor.

This method is “final” so that all preprocessing logic will be enclosed in the try/finally block.

Parameters

• callback – a function that takes result and returns a bool that indicates whether to continue on to the next preprocessor

• calling_context – specify a value here to indicate the context in which this preprocessing is being called. This value will be stored in an instance variable, self.calling_context, which can be accessed from any preprocessor method on this task. Typically this value will be either self.GUI, self.CMDLINE, or None, but any value may be supplied here and checked for in the preprocessor methods. self.calling_context always reverts back to None at the end of runPreprocessing.

runToCmd(skip_preprocessing=False)

Does the same thing as start except it doesn’t actually launch the job. Instead it just returns the final job cmd.

Intended to be used for running jobtasks on JobDJ, which requires a job cmd rather than a task.

sender(self) → QObject

senderSignalIndex(self) → int

setJob(job: schrodinger.job.jobcontrol.Job)

” Use given jobcontrol.Job to incorporate job results into the task and run postprocessors. Example:

task = FooTask()
cmd = task.runToCommand()
job = jobcontrol.launch_job(cmd)
job.wait()
task.setJob(job)

If the job has not been downloaded, the task will be set to FAILED with a SetJobRuntimeError.

Parameters

job – jobcontrol.Job with results to incorporate into the task.

setObjectName(self, name: str)

classmethod setParamValue(obj, value)

Set the value of a param on an object by specifying the instance and the value:

# Setting the param value of a basic param
a = Atom()
Atom.coord.x.setParamValue(a, 5)
assert a.coord.x == 5

# setParamValue can also be used to set the value of CompoundParams
c = Coord()
c.x = 10
atom.coord.setParamValue(a, c)
assert atom.coord.x == 10

Parameters

• param – The owner param to set a subparam value of.

• value – The value to set the subparam value to.

setParent(self, a0: QObject)

setProperty(self, name: str, value: Any) → bool

classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6

Parameters

• param1 – The first abstract param to keep synced

• param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(value=None, **kwargs)

Set the value of this CompoundParam to match value.

Parameters

• value – The value to set this CompoundParam to. It should be the same type as this CompoundParam.

• kwargs – For internal use only.

signalsBlocked(self) → bool

skip_eq_check()

specifyTaskDir(taskdir_spec)

Specify the taskdir creation behavior. Use one of the following options:

A directory name (string). This may be a relative or absolute path

None - no taskdir is requested. The task will use the CWD as its taskdir

AUTO_TASKDIR - a new subdirectory will be created in the CWD using the task name as the directory name.

TEMP_TASKDIR - a temporary directory will be created in the schrodinger temp dir. This directory is cleaned up when the task is deleted.

Parameters

taskdir_spec – one of the four options listed above

start(skip_preprocessing=False)

This is the main method for starting a task. Start will check if a task is not already running, run preprocessing, and then run the task.

Failures in preprocessing will interrupt the task start, and the task will never enter the RUNNING state.

Parameters

skip_preprocessing (bool) – whether to skip preprocessing. This can be useful if preprocessing was already performed prior to calling start.

startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) → int

staticMetaObject = <PyQt6.QtCore.QMetaObject object>

status: Status

statusChanged

statusReplaced

stop()

taskDirSetting()

Returns the taskdir spec. See specifyTaskDir() for details.

taskDone

taskFailed

taskStarted

thread(self) → QThread

timerEvent(self, a0: QTimerEvent)

toDict()

Return a dictionary version of this CompoundParam. The returned dictionary is fully nested and contains no CompoundParam instances

a = Atom()
a_dict = a.toDict()
assert a_dict['coord']['x'] == 0
assert a_dict['coord'] == {'x':0, 'y':0}

toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation()

Returns a JSON representation of this value object.

Warning

This should never be called directly.

tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) → str

valueChanged

wait(timeout=None)

Block until the task is finished executing or timeout seconds have passed.

Warning

This should not be called directly from GUI code - see PANEL-18317. It is safe to call inside a subprocess or job. Run git grep "task.wait(" to see safe examples annotated with “# OK”.

Parameters

timeout (NoneType or int) – Amount of time in seconds to wait before timing out. If None or a negative number, this method will wait until the task is finished.

write(skip_preprocessing=False)

writeStuZipFile()