schrodinger.application.jaguar.gui.tabs.multi_structure_tab module¶
- class schrodinger.application.jaguar.gui.tabs.multi_structure_tab.MultiStructureTab(parent, input_selector=None)¶
Bases:
schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesBasisMixin
,schrodinger.application.jaguar.gui.tabs.base_tab.ProvidesStructuresMixin
,schrodinger.application.jaguar.gui.tabs.base_tab.BaseTab
A parent class for tabs that allow transition state, reactant, and product structures to be selected. MultiStructureTabs also contain a Molecule subtab. Note that this class is not intended to be directly instantiated and instead should be subclassed (such as the IRC tab or Transition State tabs).
- ALL_STRUCS = [0, 1, 2]¶
- TRANSITION_STATE = 0¶
- REACTANT = 1¶
- PRODUCT = 2¶
- ENTRY_TYPE_NAMES = ('transition state', 'reactant', 'product')¶
- NEW_STRUC_DIFF_WARNING = '%s and %s entries have different %s.'¶
- ATOMS = 'atoms'¶
- ATOM_LABELS = 'atom labels'¶
- setup()¶
Perform tab specific initialization. This function should be defined in subclasses if initialization is needed.
- setupInWorkspaceColumn()¶
Set up the In Workspace column.
- setInputLoaded(input_loaded: bool)¶
- reset()¶
Clear the stored structures
- onLoadClicked()¶
Load the selected entries into the structure combos
- updateStrucCbsState()¶
Update the state of all structure checkboxes
- strucComboSelectionChanged(struc_type: int)¶
Set the entry ids based on the combobox selection. :param struc_type: Structure type of current combobox
- setStructureSelectorsEnabled(*enabled_list)¶
Enable or disable the three structure selection rows
- onStrucListingsUpdated()¶
Update the structure warning label and molecule sub tab structure
- projectUpdated()¶
Update the structure combos entries when the project is updated. Note that he callback for this function is registered in the base_panel.MultiStructureMixin class so that it can be unregistered when the panel is closed.
- validateStrucCombos() str ¶
Make sure that the structures are loaded in each of the required structure combos
- validate()¶
Make sure that all of the appropriate structures are loaded and that they all have the same atoms.
- structureCbToggled(struc_type)¶
Respond to the specified structure inclusion checkbox being toggled by including or excluding the relevant structure from the workspace.
- getStructures()¶
Get all of the structures that are loaded into the tab. Each structure will be a
schrodinger.structure.Structure
object containing the loaded structure, or None if no structure has been loaded.- Returns
A list of: - the transition state structure - the reactant structure - the product structure
- Return type
list
- loadEntriesIntoStrucCombos()¶
Load and select the structures in structure combos according to the given entry ids
- setStructures(entry_ids, jag_input=None)¶
Load the specified entry IDs into the tab
- Parameters
entry_ids (list) –
A list of:
the transition state structure entry ID
the reactant structure entry ID
the product structure entry ID
Note that this value must be a list, not a tuple.
jag_input (
schrodinger.application.jaguar.input.JaguarInput
) – A JaguarInput object containing the job settings. Note that this argument is only used for the Transition State tab version of this function in order to determine if the search method is LST, as this will affect how the structures are loaded.
- getRepresentativeStructure()¶
Retrieve one structure that can be used for basis selector calculations.
- Returns
A single representative structure, or None if no structures are loaded.
- Return type
schrodinger.structure.Structure
or NoneType
- enableStructureCombos(should_enable: bool)¶
Enable all the structure combos and corresponding structure type column entry
- Parameters
should_enable – Should the structure combos be enabled
- getEids()¶
Get the entry ids loaded into the tab
- Returns
A tuple of - A list of entry ids loaded into the tab - Whether the structures have matching atoms and atom names (bool)
- Return type
tuple
- getStructureTitleForJobname()¶
Get the structure title to be used in the job name. If the tab includes multiple structures, then
MULTIPLE_STRUC_JOB_TITLE
should be returned. If no structures have been specified yet, then None should be returned.- Returns
The structure title
- Return type
str or NoneType
- getDefaultKeywords()¶
Get the default keywords for this tab. Note that defaults that exist in mmjag should not be explicitly set here.
- getMmJagKeywords()¶
Return all keywords that should be put into the mmjag handle. This function should be defined in subclasses.
- Returns
All keywords that should be put into the mmjag handle
- Return type
dict
- Raises
schrodinger.application.jaguar.gui.utils.JaguarSettingError – If any settings are invalid.
- getBasis(ignored=None)¶
Get the currently selected basis. If more than one basis set is specified,
mixed_name
will be returned. If the tab does not allow for specifying multiple basis sets, then this argument may be ignored.- Parameters
mixed_name (str) – The name to return if more than one basis set is specified
- Returns
The currently selected basis
- Return type
str
- loadSettings(jag_input)¶
Restore tab settings from mmjag keywords. This function should be defined in subclasses.
- Parameters
jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
- DrawChildren = 2¶
- DrawWindowBackground = 1¶
- HELP_TOPIC = ''¶
- IgnoreMask = 4¶
- MULTIPLE_STRUC_JOB_TITLE = 'batch'¶
- NAME = ''¶
- class PaintDeviceMetric(value)¶
Bases:
enum.Enum
An enumeration.
- PdmWidth = 1¶
- PdmHeight = 2¶
- PdmWidthMM = 3¶
- PdmHeightMM = 4¶
- PdmNumColors = 5¶
- PdmDepth = 6¶
- PdmDpiX = 7¶
- PdmDpiY = 8¶
- PdmPhysicalDpiX = 9¶
- PdmPhysicalDpiY = 10¶
- PdmDevicePixelRatio = 11¶
- PdmDevicePixelRatioScaled = 12¶
- PdmDepth = 6¶
- PdmDevicePixelRatio = 11¶
- PdmDevicePixelRatioScaled = 12¶
- PdmDpiX = 7¶
- PdmDpiY = 8¶
- PdmHeight = 2¶
- PdmHeightMM = 4¶
- PdmNumColors = 5¶
- PdmPhysicalDpiX = 9¶
- PdmPhysicalDpiY = 10¶
- PdmWidth = 1¶
- PdmWidthMM = 3¶
- class RenderFlag(value)¶
Bases:
enum.Flag
An enumeration.
- DrawWindowBackground = 1¶
- DrawChildren = 2¶
- IgnoreMask = 4¶
- UI_MODULES = None¶
- __init__(parent, input_selector=None)¶
Perform common tab initialization. All tab specific initialization should go in setup().
- Parameters
parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget
input_selector (schrodinger.ui.qt.input_selector.InputSelector) – The panel’s input selector widget, if available.
- acceptDrops(self) bool ¶
- accessibleDescription(self) str ¶
- accessibleName(self) str ¶
- actionEvent(self, a0: QActionEvent)¶
- actions(self) List[QAction] ¶
- activate()¶
This function will be called whenever the user selects this tab. Subclasses can override it if necessary to, e.g., activate picking.
- activateWindow(self)¶
- addAction(self, action: QAction)¶
- addActions(self, actions: Iterable[QAction])¶
- adjustSize(self)¶
- autoFillBackground(self) bool ¶
- backgroundRole(self) QPalette.ColorRole ¶
- baseSize(self) QSize ¶
- basis_changed¶
- blockSignals(self, b: bool) bool ¶
- changeEvent(self, a0: QEvent)¶
- childAt(self, p: QPoint) QWidget ¶
- childAt(self, ax: int, ay: int) QWidget
- childEvent(self, a0: QChildEvent)¶
- children(self) List[QObject] ¶
- childrenRect(self) QRect ¶
- childrenRegion(self) QRegion ¶
- clearFocus(self)¶
- clearMask(self)¶
- close(self) bool ¶
- closeEvent(self, a0: QCloseEvent)¶
- colorCount(self) int ¶
- connectNotify(self, signal: QMetaMethod)¶
- contentsMargins(self) QMargins ¶
- contentsRect(self) QRect ¶
- contextMenuEvent(self, a0: QContextMenuEvent)¶
- contextMenuPolicy(self) Qt.ContextMenuPolicy ¶
- create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)¶
- createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget ¶
- cursor(self) QCursor ¶
- customContextMenuRequested¶
customContextMenuRequested(self, pos: QPoint) [signal]
- customEvent(self, a0: QEvent)¶
- deactivate()¶
This function will be called whenever the user selects a different tab. Subclasses can override it if necessary to, e.g., deactivate picking.
- deleteLater(self)¶
- depth(self) int ¶
- destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)¶
- destroyed¶
destroyed(self, object: typing.Optional[QObject] = None) [signal]
- devType(self) int ¶
- devicePixelRatio(self) float ¶
- devicePixelRatioF(self) float ¶
- devicePixelRatioFScale() float ¶
- disconnect(a0: QMetaObject.Connection) bool ¶
- disconnect(self) None
- disconnectNotify(self, signal: QMetaMethod)¶
- dragEnterEvent(self, a0: QDragEnterEvent)¶
- dragLeaveEvent(self, a0: QDragLeaveEvent)¶
- dragMoveEvent(self, a0: QDragMoveEvent)¶
- dropEvent(self, a0: QDropEvent)¶
- dumpObjectInfo(self)¶
- dumpObjectTree(self)¶
- dynamicPropertyNames(self) List[QByteArray] ¶
- effectiveWinId(self) PyQt6.sip.voidptr ¶
- ensurePolished(self)¶
- enterEvent(self, event: QEnterEvent)¶
- error(msg)¶
Display an error dialog with the specified message
- Parameters
msg (str) – The message to include in the error dialog
- event(self, a0: QEvent) bool ¶
- eventFilter(self, a0: QObject, a1: QEvent) bool ¶
- find(a0: PyQt6.sip.voidptr) QWidget ¶
- findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject ¶
- findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
- findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject] ¶
- findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
- findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
- findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
- focusInEvent(self, a0: QFocusEvent)¶
- focusNextChild(self) bool ¶
- focusNextPrevChild(self, next: bool) bool ¶
- focusOutEvent(self, a0: QFocusEvent)¶
- focusPolicy(self) Qt.FocusPolicy ¶
- focusPreviousChild(self) bool ¶
- focusProxy(self) QWidget ¶
- focusWidget(self) QWidget ¶
- font(self) QFont ¶
- fontInfo(self) QFontInfo ¶
- fontMetrics(self) QFontMetrics ¶
- foregroundRole(self) QPalette.ColorRole ¶
- frameGeometry(self) QRect ¶
- frameSize(self) QSize ¶
- geometry(self) QRect ¶
- grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap ¶
- grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())¶
- grabKeyboard(self)¶
- grabMouse(self)¶
- grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
- grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int ¶
- graphicsEffect(self) QGraphicsEffect ¶
- graphicsProxyWidget(self) QGraphicsProxyWidget ¶
- hasFocus(self) bool ¶
- hasHeightForWidth(self) bool ¶
- hasMouseTracking(self) bool ¶
- hasTabletTracking(self) bool ¶
- height(self) int ¶
- heightForWidth(self, a0: int) int ¶
- heightMM(self) int ¶
- hide(self)¶
- hideEvent(self, a0: QHideEvent)¶
- inherits(self, classname: str) bool ¶
- initPainter(self, painter: QPainter)¶
- inputMethodEvent(self, a0: QInputMethodEvent)¶
- inputMethodHints(self) Qt.InputMethodHint ¶
- inputMethodQuery(self, a0: Qt.InputMethodQuery) Any ¶
- insertAction(self, before: QAction, action: QAction)¶
- insertActions(self, before: QAction, actions: Iterable[QAction])¶
- installEventFilter(self, a0: QObject)¶
- isActiveWindow(self) bool ¶
- isAncestorOf(self, child: QWidget) bool ¶
- isEnabled(self) bool ¶
- isEnabledTo(self, a0: QWidget) bool ¶
- isFullScreen(self) bool ¶
- isHidden(self) bool ¶
- isLeftToRight(self) bool ¶
- isMaximized(self) bool ¶
- isMinimized(self) bool ¶
- isModal(self) bool ¶
- isRightToLeft(self) bool ¶
- isSignalConnected(self, signal: QMetaMethod) bool ¶
- isVisible(self) bool ¶
- isVisibleTo(self, a0: QWidget) bool ¶
- isWidgetType(self) bool ¶
- isWindow(self) bool ¶
- isWindowModified(self) bool ¶
- isWindowType(self) bool ¶
- keyPressEvent(self, a0: QKeyEvent)¶
- keyReleaseEvent(self, a0: QKeyEvent)¶
- keyboardGrabber() QWidget ¶
- killTimer(self, id: int)¶
- layout(self) QLayout ¶
- layoutDirection(self) Qt.LayoutDirection ¶
- leaveEvent(self, a0: QEvent)¶
- loadPerAtomSettings(jag_input, eid=None, title=None)¶
Restore per-atom tab settings from mmjag keywords. This function should be defined in subclasses for any tabs that contain per-atom settings.
- Parameters
jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar settings to base the tab settings on
eid (str) – The entry id of the structure in
jag_input
title (str) – The title of the structure in
jag_input
- locale(self) QLocale ¶
- logicalDpiX(self) int ¶
- logicalDpiY(self) int ¶
- lower(self)¶
- mapFrom(self, a0: QWidget, a1: QPoint) QPoint ¶
- mapFrom(self, a0: QWidget, a1: QPointF) QPointF
- mapFromGlobal(self, a0: QPoint) QPoint ¶
- mapFromGlobal(self, a0: QPointF) QPointF
- mapFromParent(self, a0: QPoint) QPoint ¶
- mapFromParent(self, a0: QPointF) QPointF
- mapTo(self, a0: QWidget, a1: QPoint) QPoint ¶
- mapTo(self, a0: QWidget, a1: QPointF) QPointF
- mapToGlobal(self, a0: QPoint) QPoint ¶
- mapToGlobal(self, a0: QPointF) QPointF
- mapToParent(self, a0: QPoint) QPoint ¶
- mapToParent(self, a0: QPointF) QPointF
- mask(self) QRegion ¶
- maximumHeight(self) int ¶
- maximumSize(self) QSize ¶
- maximumWidth(self) int ¶
- metaObject(self) QMetaObject ¶
- metric(self, a0: QPaintDevice.PaintDeviceMetric) int ¶
- minimumHeight(self) int ¶
- minimumSize(self) QSize ¶
- minimumSizeHint(self) QSize ¶
- minimumWidth(self) int ¶
- mouseDoubleClickEvent(self, a0: QMouseEvent)¶
- mouseGrabber() QWidget ¶
- mouseMoveEvent(self, a0: QMouseEvent)¶
- mousePressEvent(self, a0: QMouseEvent)¶
- mouseReleaseEvent(self, a0: QMouseEvent)¶
- move(self, a0: QPoint)¶
- move(self, ax: int, ay: int) None
- moveEvent(self, a0: QMoveEvent)¶
- moveToThread(self, thread: QThread)¶
- nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr] ¶
- nativeParentWidget(self) QWidget ¶
- nextInFocusChain(self) QWidget ¶
- normalGeometry(self) QRect ¶
- objectName(self) str ¶
- objectNameChanged¶
objectNameChanged(self, objectName: str) [signal]
- overrideWindowFlags(self, type: Qt.WindowType)¶
- overrideWindowState(self, state: Qt.WindowState)¶
- paintEngine(self) QPaintEngine ¶
- paintEvent(self, a0: QPaintEvent)¶
- paintingActive(self) bool ¶
- palette(self) QPalette ¶
- parent(self) QObject ¶
- parentWidget(self) QWidget ¶
- physicalDpiX(self) int ¶
- physicalDpiY(self) int ¶
- pos(self) QPoint ¶
- previousInFocusChain(self) QWidget ¶
- property(self, name: str) Any ¶
- pyqtConfigure(...)¶
Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.
- raise_(self)¶
- receivers(self, signal: PYQT_SIGNAL) int ¶
- rect(self) QRect ¶
- releaseKeyboard(self)¶
- releaseMouse(self)¶
- releaseShortcut(self, id: int)¶
- removeAction(self, action: QAction)¶
- removeEventFilter(self, a0: QObject)¶
- render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))¶
- render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
- repaint(self)¶
- repaint(self, x: int, y: int, w: int, h: int) None
- repaint(self, a0: QRect) None
- repaint(self, a0: QRegion) None
- resize(self, a0: QSize)¶
- resize(self, w: int, h: int) None
- resizeEvent(self, a0: QResizeEvent)¶
- restoreGeometry(self, geometry: QByteArray) bool ¶
- saveGeometry(self) QByteArray ¶
- saveSettings(jag_input, eid)¶
Save tab settings in jaguar handle. It is only used for settings which are not defined using keywords (typically per-atom settings). This function should be defined in subclasses for any tabs that contain per- atom settings.
- Parameters
jag_input (schrodinger.application.jaguar.input.JaguarInput) – The Jaguar handle to store the tab settings in
eid (str) – The entry id of the structure in
jag_input
- screen(self) QScreen ¶
- scroll(self, dx: int, dy: int)¶
- scroll(self, dx: int, dy: int, a2: QRect) None
- sender(self) QObject ¶
- senderSignalIndex(self) int ¶
- setAcceptDrops(self, on: bool)¶
- setAccessibleDescription(self, description: str)¶
- setAccessibleName(self, name: str)¶
- setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)¶
- setAutoFillBackground(self, enabled: bool)¶
- setBackgroundRole(self, a0: QPalette.ColorRole)¶
- setBaseSize(self, basew: int, baseh: int)¶
- setBaseSize(self, s: QSize) None
- setContentsMargins(self, left: int, top: int, right: int, bottom: int)¶
- setContentsMargins(self, margins: QMargins) None
- setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)¶
- setCursor(self, a0: Union[QCursor, Qt.CursorShape])¶
- setDisabled(self, a0: bool)¶
- setEnabled(self, a0: bool)¶
- setFixedHeight(self, h: int)¶
- setFixedSize(self, a0: QSize)¶
- setFixedSize(self, w: int, h: int) None
- setFixedWidth(self, w: int)¶
- setFocus(self)¶
- setFocus(self, reason: Qt.FocusReason) None
- setFocusPolicy(self, policy: Qt.FocusPolicy)¶
- setFocusProxy(self, a0: QWidget)¶
- setFont(self, a0: QFont)¶
- setForegroundRole(self, a0: QPalette.ColorRole)¶
- setGeometry(self, a0: QRect)¶
- setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
- setGraphicsEffect(self, effect: QGraphicsEffect)¶
- setHidden(self, hidden: bool)¶
- setInputMethodHints(self, hints: Qt.InputMethodHint)¶
- setLayout(self, a0: QLayout)¶
- setLayoutDirection(self, direction: Qt.LayoutDirection)¶
- setLocale(self, locale: QLocale)¶
- setMask(self, a0: QBitmap)¶
- setMask(self, a0: QRegion) None
- setMaximumHeight(self, maxh: int)¶
- setMaximumSize(self, maxw: int, maxh: int)¶
- setMaximumSize(self, s: QSize) None
- setMaximumWidth(self, maxw: int)¶
- setMinimumHeight(self, minh: int)¶
- setMinimumSize(self, minw: int, minh: int)¶
- setMinimumSize(self, s: QSize) None
- setMinimumWidth(self, minw: int)¶
- setMouseTracking(self, enable: bool)¶
- setObjectName(self, name: str)¶
- setPalette(self, a0: QPalette)¶
- setParent(self, parent: QWidget)¶
- setParent(self, parent: QWidget, f: Qt.WindowType) None
- setProperty(self, name: str, value: Any) bool ¶
- setScreen(self, a0: QScreen)¶
- setShortcutAutoRepeat(self, id: int, enabled: bool = True)¶
- setShortcutEnabled(self, id: int, enabled: bool = True)¶
- setSizeIncrement(self, w: int, h: int)¶
- setSizeIncrement(self, s: QSize) None
- setSizePolicy(self, a0: QSizePolicy)¶
- setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
- setStatusTip(self, a0: str)¶
- setStyle(self, a0: QStyle)¶
- setStyleSheet(self, styleSheet: str)¶
- setTabOrder(a0: QWidget, a1: QWidget)¶
- setTabletTracking(self, enable: bool)¶
- setToolTip(self, a0: str)¶
- setToolTipDuration(self, msec: int)¶
- setUpdatesEnabled(self, enable: bool)¶
- setVisible(self, visible: bool)¶
- setWhatsThis(self, a0: str)¶
- setWindowFilePath(self, filePath: str)¶
- setWindowFlag(self, a0: Qt.WindowType, on: bool = True)¶
- setWindowFlags(self, type: Qt.WindowType)¶
- setWindowIcon(self, icon: QIcon)¶
- setWindowIconText(self, a0: str)¶
- setWindowModality(self, windowModality: Qt.WindowModality)¶
- setWindowModified(self, a0: bool)¶
- setWindowOpacity(self, level: float)¶
- setWindowRole(self, a0: str)¶
- setWindowState(self, state: Qt.WindowState)¶
- setWindowTitle(self, a0: str)¶
- show(self)¶
- showEvent(self, a0: QShowEvent)¶
- showFullScreen(self)¶
- showMaximized(self)¶
- showMinimized(self)¶
- showNormal(self)¶
- signalsBlocked(self) bool ¶
- size(self) QSize ¶
- sizeHint(self) QSize ¶
- sizeIncrement(self) QSize ¶
- sizePolicy(self) QSizePolicy ¶
- stackUnder(self, a0: QWidget)¶
- startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int ¶
- staticMetaObject = <PyQt6.QtCore.QMetaObject object>¶
- statusTip(self) str ¶
- structureChanged¶
- style(self) QStyle ¶
- styleSheet(self) str ¶
- tabletEvent(self, a0: QTabletEvent)¶
- testAttribute(self, attribute: Qt.WidgetAttribute) bool ¶
- thread(self) QThread ¶
- timerEvent(self, a0: QTimerEvent)¶
- toolTip(self) str ¶
- toolTipDuration(self) int ¶
- tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str ¶
- underMouse(self) bool ¶
- ungrabGesture(self, type: Qt.GestureType)¶
- unsetCursor(self)¶
- unsetLayoutDirection(self)¶
- unsetLocale(self)¶
- update(self)¶
- update(self, a0: QRect) None
- update(self, a0: QRegion) None
- update(self, ax: int, ay: int, aw: int, ah: int) None
- updateGeometry(self)¶
- updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)¶
- updatesEnabled(self) bool ¶
- visibleRegion(self) QRegion ¶
- warning(msg)¶
Display a warning dialog with the specified message
- Parameters
msg (str) – The message to include in the warning dialog
- whatsThis(self) str ¶
- wheelEvent(self, a0: QWheelEvent)¶
- width(self) int ¶
- widthMM(self) int ¶
- winId(self) PyQt6.sip.voidptr ¶
- window(self) QWidget ¶
- windowFilePath(self) str ¶
- windowFlags(self) Qt.WindowType ¶
- windowHandle(self) QWindow ¶
- windowIcon(self) QIcon ¶
- windowIconChanged¶
windowIconChanged(self, icon: QIcon) [signal]
- windowIconText(self) str ¶
- windowIconTextChanged¶
windowIconTextChanged(self, iconText: str) [signal]
- windowModality(self) Qt.WindowModality ¶
- windowOpacity(self) float ¶
- windowRole(self) str ¶
- windowState(self) Qt.WindowState ¶
- windowTitle(self) str ¶
- windowTitleChanged¶
windowTitleChanged(self, title: str) [signal]
- windowType(self) Qt.WindowType ¶
- x(self) int ¶
- y(self) int ¶