schrodinger.application.livedesign.export_models module

class schrodinger.application.livedesign.export_models.RefreshResult(value)

Bases: enum.Enum

An enumeration.

none = 1
success = 2
failure = 3
class schrodinger.application.livedesign.export_models.MatchCompoundsBy(value)[source]

Bases: enum.Enum

An enumeration.

structure = 'Structure or Imported Corporate ID'
corp_id = 'Corporate ID'
class schrodinger.application.livedesign.export_models.LDDestination(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Parameters specifying the destination of the exported data, both LiveDesign server and live report.

host: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
proj_id: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
proj_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
lr_id: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
lr_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

hostChanged
hostReplaced
inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
lr_idChanged
lr_idReplaced
lr_nameChanged
lr_nameReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
proj_idChanged
proj_idReplaced
proj_nameChanged
proj_nameReplaced
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.DataExportSpec(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Abstract specification for uploading data to a LiveDesign server.

data_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_model: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_endpoint: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
units: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
option: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
addDataToExportTask(task)[source]

Update the provided task with data from this specification.

Must be overridden in concrete subclasses.

Parameters

task (tasks.ThreadFunctionTask) – an export task

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
data_nameChanged
data_nameReplaced
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_endpointChanged
ld_endpointReplaced
ld_modelChanged
ld_modelReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

optionChanged
optionReplaced
classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
unitsChanged
unitsReplaced
valueChanged
class schrodinger.application.livedesign.export_models.PropertyExportSpec(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.application.livedesign.export_models.DataExportSpec

Specification for structure property data.

addDataToExportTask(task)[source]

Update the provided task prop_dicts attribute with data from this specification.

Parameters

task (tasks.ThreadFunctionTask) – an export task

getName()[source]
Returns

the appropriate value for the “name” field for this property’s property dictionary during export to LiveDesign

Return type

str

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
data_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
data_nameChanged
data_nameReplaced
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_endpoint: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_endpointChanged
ld_endpointReplaced
ld_model: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_modelChanged
ld_modelReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

option: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
optionChanged
optionReplaced
classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
units: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
unitsChanged
unitsReplaced
valueChanged
class schrodinger.application.livedesign.export_models.Base3DExportSpec(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.application.livedesign.export_models.DataExportSpec

Abstract specification for 3D structure data.

addDataToExportTask(task, rl_map, corp_id_match_prop=None)[source]

Update the provided task three_d_export_items attribute with data from this specification.

Parameters
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
data_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
data_nameChanged
data_nameReplaced
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_endpoint: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_endpointChanged
ld_endpointReplaced
ld_model: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_modelChanged
ld_modelReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

option: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
optionChanged
optionReplaced
classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
units: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
unitsChanged
unitsReplaced
valueChanged
class schrodinger.application.livedesign.export_models.Standard3DExportSpec(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.application.livedesign.export_models.Base3DExportSpec

Specification for standard 3D export.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
addDataToExportTask(task, rl_map, corp_id_match_prop=None)

Update the provided task three_d_export_items attribute with data from this specification.

Parameters
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
data_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
data_nameChanged
data_nameReplaced
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_endpoint: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_endpointChanged
ld_endpointReplaced
ld_model: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_modelChanged
ld_modelReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

option: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
optionChanged
optionReplaced
classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
units: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
unitsChanged
unitsReplaced
valueChanged
class schrodinger.application.livedesign.export_models.AttachmentItem(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Data class for linking structures with a local and remote file path for an upload

row_structures: List[schrodinger.structure._structure.Structure]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

file_path: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
remote_file_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
file_type: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
file_pathChanged
file_pathReplaced
file_typeChanged
file_typeReplaced
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
remote_file_nameChanged
remote_file_nameReplaced
removeEventFilter(self, QObject)
reset(*args, **kwargs)
row_structuresChanged
row_structuresReplaced
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.AttachmentData(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Data class for storing FFC attachment information.

description: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
attachment_items: List[schrodinger.application.livedesign.export_models.AttachmentItem]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
attachment_itemsChanged
attachment_itemsReplaced
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
descriptionChanged
descriptionReplaced
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.FFCExportSpec(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.application.livedesign.export_models.DataExportSpec

Abstract specification for FFC attachment export.

FILE_TYPE: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DESCRIPTION = NotImplemented
attachment_items: List[schrodinger.application.livedesign.export_models.AttachmentItem]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

getAttachmentData(panel_model)[source]

Retrieve and store attachment data from the panel model.

Must be overridden in concrete subclasses.

Parameters

panel_model (ld_export2.ExportModel) – the model for the LD Export panel

addDataToExportTask(task)[source]

Update the provided task attachment_data_map attribute with data from this specification.

Parameters

task (tasks.ThreadFunctionTask) – an export task

createAttachmentItems()[source]

Create attachment items for a given task. These items link structures (rows in the LiveReport) with the attachment to be uploaded for them.

Must be overridden in concrete subclasses.

Returns

a list of attachment items to upload data for

Return type

list(AttachmentItem)

removeLocalFiles()[source]

Remove the files created by this spec, if they still exist.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
FILE_TYPEChanged
FILE_TYPEReplaced
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
attachment_itemsChanged
attachment_itemsReplaced
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
data_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
data_nameChanged
data_nameReplaced
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_endpoint: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_endpointChanged
ld_endpointReplaced
ld_model: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_modelChanged
ld_modelReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

option: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
optionChanged
optionReplaced
classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
units: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
unitsChanged
unitsReplaced
valueChanged
class schrodinger.application.livedesign.export_models.ThreeDExportItem(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Parameters specifying 3D structure data export.

Variables

key (structure.Structure or str or NoneType) –

the identification key for this 3D item. It should either be:

  1. a structure, if its corporate ID should be the same as that assigned to a structure that has not yet been exported

  2. a string, if its corporate ID is known

  3. None, if its corporate ID should be automatically assigned by LD

key: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ligand: schrodinger.structure._structure.Structure

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
receptor: schrodinger.structure._structure.Structure

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
three_d_specs: List[schrodinger.application.livedesign.export_models.Base3DExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

setItemKey(key)[source]

Assign the key to be used to identify where this item should be stored on a LiveDesign server.

Parameters

key (structure.Structure or str or NoneType) – the identification key for this item

setLigandCorpID(corp_id)[source]

Assign the corporate ID for this structure.

Parameters

corp_id (str or NoneType) – the corporate ID, if any

getLigandCorpID()[source]
Returns

the corporate ID for this item

Return type

str or NoneType

getLigandCompoundID()[source]
Returns

the compound ID for this item

Return type

str or NoneType

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
keyChanged
keyReplaced
killTimer(self, int)
ligandChanged
ligandReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
receptorChanged
receptorReplaced
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
three_d_specsChanged
three_d_specsReplaced
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.SummaryModel(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

The model for the summary panel shown the user prior to export.

ld_destination: schrodinger.application.livedesign.export_models.LDDestination

Parameters specifying the destination of the exported data, both LiveDesign server and live report.

structures_for_2d_export: List[schrodinger.structure._structure.Structure]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

input_summary: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
three_d_export_items: List[schrodinger.application.livedesign.export_models.ThreeDExportItem]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

match_compounds_by: schrodinger.application.livedesign.export_models.MatchCompoundsBy
property_export_specs: List[schrodinger.application.livedesign.export_models.PropertyExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

ffc_export_specs: List[schrodinger.application.livedesign.export_models.FFCExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

export_specs: List[schrodinger.application.livedesign.export_models.DataExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

publish_data: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
export_specsChanged
export_specsReplaced
ffc_export_specsChanged
ffc_export_specsReplaced
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

input_summaryChanged
input_summaryReplaced
installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_destinationChanged
ld_destinationReplaced
match_compounds_byChanged
match_compounds_byReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
property_export_specsChanged
property_export_specsReplaced
publish_dataChanged
publish_dataReplaced
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
structures_for_2d_exportChanged
structures_for_2d_exportReplaced
thread(self) → QThread
three_d_export_itemsChanged
three_d_export_itemsReplaced
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.LDClientModelMixin[source]

Bases: object

Mixin for models that contain a LDClient instance named ld_client.

refreshLDClient()[source]

Check whether the stored LDClient instance is connected to LiveDesign. If not, create a new instance and replace the old one if the new one is connected.

Returns

an enum describing the status of the connection; - none if no refresh was required - success if the the LDClient instance was replaced - failure if even the new LDClient instance was disconnected

Return type

RefreshResult

class schrodinger.application.livedesign.export_models.TaskInput(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.application.livedesign.export_models.LDClientModelMixin, schrodinger.models.parameters.CompoundParam

Input model for export tasks.

ld_client: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_models: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_destination: schrodinger.application.livedesign.export_models.LDDestination

Parameters specifying the destination of the exported data, both LiveDesign server and live report.

structures_for_2d_export: List[schrodinger.structure._structure.Structure]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

three_d_export_items: List[schrodinger.application.livedesign.export_models.ThreeDExportItem]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

property_export_specs: List[schrodinger.application.livedesign.export_models.PropertyExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

ffc_export_specs: List[schrodinger.application.livedesign.export_models.FFCExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

publish_data: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
entry_type_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
export_3d: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
pose_name_custom_text: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
pose_name_propname: schrodinger.structure._structure.PropertyName

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
entry_type_nameChanged
entry_type_nameReplaced
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
export_3dChanged
export_3dReplaced
ffc_export_specsChanged
ffc_export_specsReplaced
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_clientChanged
ld_clientReplaced
ld_destinationChanged
ld_destinationReplaced
ld_modelsChanged
ld_modelsReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
pose_name_custom_textChanged
pose_name_custom_textReplaced
pose_name_propnameChanged
pose_name_propnameReplaced
property(self, str) → Any
property_export_specsChanged
property_export_specsReplaced
publish_dataChanged
publish_dataReplaced
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
refreshLDClient()

Check whether the stored LDClient instance is connected to LiveDesign. If not, create a new instance and replace the old one if the new one is connected.

Returns

an enum describing the status of the connection; - none if no refresh was required - success if the the LDClient instance was replaced - failure if even the new LDClient instance was disconnected

Return type

RefreshResult

removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
structures_for_2d_exportChanged
structures_for_2d_exportReplaced
thread(self) → QThread
three_d_export_itemsChanged
three_d_export_itemsReplaced
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.PoseNameEditModel(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Model for the Pose Name Edit Panel.

Variables

  • custom_text – the text of the custom text line edit; this value is stored temporarily while the panel is open, and will be copied to custom_text_final if the user accepts the panel

  • include_property – the check state of the “include property” checkbox

  • property_name – the structure property (if any) selected as part of the custom pose name; this value is stored temporarily while the panel is open, and will be copied to property_name_final if the user accepts the panel

  • property_user_name – the text of the structure property label

  • example_prop_string – the text of the example property

  • example_name – the text of the example pose name label

  • entry_data – the system entry data for the panel

  • custom_text_final – the custom text accepted by the user

  • property_name_final – the structure property (if any) accepted by the user

custom_text: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
include_property: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
property_name: schrodinger.structure._structure.PropertyName

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
property_user_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
example_prop_string: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
example_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
entry_data: schrodinger.application.livedesign.entry_types.BaseEntryData

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
custom_text_final: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
property_name_final: schrodinger.structure._structure.PropertyName

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
custom_textChanged
custom_textReplaced
custom_text_finalChanged
custom_text_finalReplaced
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
entry_dataChanged
entry_dataReplaced
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
example_nameChanged
example_nameReplaced
example_prop_stringChanged
example_prop_stringReplaced
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

include_propertyChanged
include_propertyReplaced
inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
property_nameChanged
property_nameReplaced
property_name_finalChanged
property_name_finalReplaced
property_user_nameChanged
property_user_nameReplaced
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.AttachmentTaskInput(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.application.livedesign.export_models.TaskInput

Input model for FFC attachment export task.

corp_ids: List[str]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
corp_idsChanged
corp_idsReplaced
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
entry_type_name: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
entry_type_nameChanged
entry_type_nameReplaced
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
export_3d: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
export_3dChanged
export_3dReplaced
ffc_export_specs: List[schrodinger.application.livedesign.export_models.FFCExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

ffc_export_specsChanged
ffc_export_specsReplaced
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
ld_client: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_clientChanged
ld_clientReplaced
ld_destination: schrodinger.application.livedesign.export_models.LDDestination

Parameters specifying the destination of the exported data, both LiveDesign server and live report.

ld_destinationChanged
ld_destinationReplaced
ld_models: object

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
ld_modelsChanged
ld_modelsReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
pose_name_custom_text: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
pose_name_custom_textChanged
pose_name_custom_textReplaced
pose_name_propname: schrodinger.structure._structure.PropertyName

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
pose_name_propnameChanged
pose_name_propnameReplaced
property(self, str) → Any
property_export_specs: List[schrodinger.application.livedesign.export_models.PropertyExportSpec]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

property_export_specsChanged
property_export_specsReplaced
publish_data: bool

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
publish_dataChanged
publish_dataReplaced
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
refreshLDClient()

Check whether the stored LDClient instance is connected to LiveDesign. If not, create a new instance and replace the old one if the new one is connected.

Returns

an enum describing the status of the connection; - none if no refresh was required - success if the the LDClient instance was replaced - failure if even the new LDClient instance was disconnected

Return type

RefreshResult

removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
structures_for_2d_export: List[schrodinger.structure._structure.Structure]

A Param to represent lists. Values of this param will have a mutated signal that will be emitted whenever any mutation method is called.

The constructor optionally takes a item_class keyword argument to specify what type of class the items in the list will be. This information will be used for jsonifying the list if specified.

structures_for_2d_exportChanged
structures_for_2d_exportReplaced
thread(self) → QThread
three_d_export_items: List[schrodinger.application.livedesign.export_models.ThreeDExportItem]

A list param that contains CompoundParam instances. Signals will be emitted any time an item in the list changes or the contents of the list itself change. See _SignalContainer and _PLPSignalContainer for information on specific signals.

three_d_export_itemsChanged
three_d_export_itemsReplaced
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.AttachmentTaskOutput(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Output model for FFC attachment export task.

num_success: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
num_failure: int

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
metaObject(self) → QMetaObject
moveToThread(self, QThread)
num_failureChanged
num_failureReplaced
num_successChanged
num_successReplaced
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
class schrodinger.application.livedesign.export_models.FileBatch(*args, _param_type=<object object>, **kwargs)[source]

Bases: schrodinger.models.parameters.CompoundParam

Data class for storing file paths necessary for standard LD export (v8.6-).

map_file_path: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
sdf_file_path: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
three_d_file_path: str

Base class for all Param classes. A Param is a descriptor for storing data, which means that a single Param instance will manage the data values for multiple instances of the class that owns it. Example:

class Coord(CompoundParam):
    x: int
    y: int

An instance of the Coord class can be created normally, and Params can be accessed as normal attributes:

coord = Coord()
coord.x = 4

When a Param value is set, the valueChanged signal is emitted. Params can be serialized and deserialized to and from JSON. Params can also be nested:

class Atom(CompoundParam):
    coord: Coord
    element: str
DataClass

This class can be used to declare a public attribute on a CompoundParam. Declared public attributes can be used without error.

Example usage:

class Coord(CompoundParam):
    x: int
    y: int
    note = NonParamAttribute()

coord = Coord()
coord.note = "hello" # No error
__init__(default_value=<object object>, _param_type=<object object>, **kwargs)
classmethod addSubParam(name, param, update_owner=True)
blockSignals(self, bool) → bool
block_signal_propagation()
childEvent(self, QChildEvent)
children(self) → List[QObject]
classmethod configureParam()

Override this class method to set up the abstract param class (e.g. setParamReference on child params.)

connectNotify(self, QMetaMethod)
customEvent(self, QEvent)
classmethod defaultValue(*args, **kwargs)
deleteLater(self)
destroyed

destroyed(self, object: QObject = None) [signal]

disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
event(self, QEvent) → bool
eventFilter(self, QObject, QEvent) → bool
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
classmethod fromJson(json_obj)

A factory method which constructs a new object from a given dict loaded from a json string or file.

Parameters

json_obj (dict) – A json-loaded dictionary to create an object from.

Returns

An instance of this class.

Return type

cls

classmethod fromJsonImplementation(json_dict)

Sets the value of this compound param value object from a JSON dict.

Warning

This should never be called directly.

getAbstractParam(*args, **kwargs)
classmethod getJsonBlacklist()

Override to customize what params are serialized.

Implementations should return a list of abstract params that should be omitted from serialization.

..NOTE

Returned abstract params must be direct child params of cls, e.g. cls.name, not cls.coord.x.

classmethod getParamSignal(*args, **kwargs)
classmethod getParamValue(*args, **kwargs)
classmethod getSubParam(name)

Get the value of a subparam using the string name:

c = Coord()
assert c.getSubParam('x') == 0

Note

Using the string name to access params is generally discouraged, but can be useful for serializing/deserializing param data.

Parameters

name (str) – The name of the subparam to get the value for.

classmethod getSubParams()

Return a dictionary mapping subparam names to their values.

getTypeHint()
get_version()

Method to get the version of a particular object. Defaults to the current version of mmshare. This class can be overridden for custom versioning behavior.

inherits(self, str) → bool
initAbstract()
initConcrete()

Override to customize initialization of concrete params.

initializeValue()

Override to dynamically set up the default value of the param. Useful for default values that are determined at runtime. This is called any time the param is reset.

installEventFilter(self, QObject)
classmethod isAbstract()

Whether the param is an “abstract” param.

isDefault(*args, **kwargs)
isSignalConnected(self, QMetaMethod) → bool
isWidgetType(self) → bool
isWindowType(self) → bool
killTimer(self, int)
map_file_pathChanged
map_file_pathReplaced
metaObject(self) → QMetaObject
moveToThread(self, QThread)
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

classmethod owner()

Get the owner of the param:

# Can be called on an abstract param:
assert Coord.x.owner() == Coord

# ...or on an instance of a CompoundParam
a = Atom()
assert a.coord.owner() == a
classmethod ownerChain()

Returns a list of param owners starting from the toplevel param and ending with self. Examples:

foo.bar.atom.coord.ownerChain() will return [foo, bar, atom, coord] where every item is a concrete param.

Foo.bar.atom.coord.x.ownerChain() will return [Foo, Foo.bar, Foo.atom.coord, Foo.atom.coord.x] where every item is an abstract params.

classmethod paramName()

Get the name of the param:

# Can be called on an abstract param:
print(Coord.x.paramName()) # 'x'

# ...or on an instance of a CompoundParam
a = Atom()
a.coord.paramName() # 'coord'
parent(self) → QObject
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, PYQT_SIGNAL) → int
removeEventFilter(self, QObject)
reset(*args, **kwargs)
sdf_file_pathChanged
sdf_file_pathReplaced
sender(self) → QObject
senderSignalIndex(self) → int
setObjectName(self, str)
classmethod setParamValue(*args, **kwargs)
setParent(self, QObject)
setProperty(self, str, Any) → bool
classmethod setReference(param1, param2)

Call this class method from configureParam to indicate that two params should be kept in sync. The initial values will start with the default value of param1. Example:

class Square(CompoundParam):
    width: float = 5
    height: float = 10

    @classmethod
    def configureParam(cls):
        super().configureParam()
        cls.setReference(cls.width, cls.height)

square = Square()
assert square.width == square.height == 5 # Default value of width
                                          # takes priority
square.height = 7
assert square.width == square.height == 7
square.width = 6
assert square.width == square.height == 6
Parameters

  • param1 – The first abstract param to keep synced

  • param2 – The second abstract param. After instantiation, this param will take on the value of param1.

setValue(*args, **kwargs)
signalsBlocked(self) → bool
skip_eq_check()
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
thread(self) → QThread
three_d_file_pathChanged
three_d_file_pathReplaced
timerEvent(self, QTimerEvent)
toDict(*args, **kwargs)
toJson(_mark_version=True)

Create and returns a data structure made up of jsonable items.

Return type

An instance of one the classes from NATIVE_JSON_DATATYPES

toJsonImplementation(*args, **kwargs)

Abstract method that must be defined by all derived classes. Converts an instance of the derived class into a jsonifiable object.

Returns

A dict made up of JSON native datatypes or Jsonable objects. See the link below for a table of such types. https://docs.python.org/2/library/json.html#encoders-and-decoders

tr(self, str, disambiguation: str = None, n: int = - 1) → str
valueChanged
schrodinger.application.livedesign.export_models.make_prop_dict(units='', name='', endpoint='', model='')[source]

Return a dictionary formatted to represent a structure property. Formatting should match the dictionary formatting required by the properties argument of LDClient.start_export_assay_and_pose_data().

Parameters

  • units (str) – unit system used by this property

  • name (str) – name for this property; either the data name or user name

  • endpoint (str) – the LiveDesign endpoint

  • model (str) – the user-specified portion of the name for the column under which this property will be stored after export to LiveDesign