schrodinger.trajectory.trajectory_gui_dir.traj_plot_gui module

Plot panel for the Trajectory Player.

Copyright Schrodinger, LLC. All rights reserved.

schrodinger.trajectory.trajectory_gui_dir.traj_plot_gui.get_plot_title_template(task)[source]

Generate a plot title and tooltip for the specified task. The string will contain “{idx}” as a place-holder for where plot number will be inserted, because plot numbers can change as plots are re-ordered (advanced charts only).

Parameters

task (traj_plot_model.AnalysisTask) – Task to get plot title for.

Returns

Plot title and tooltip to use

Return type

tuple(str, str)

class schrodinger.trajectory.trajectory_gui_dir.traj_plot_gui.TrajAnalysisPlotPanel(dockarea=None, **kwargs)[source]

Bases: schrodinger.ui.qt.basewidgets.MaestroDockPanel

Overraching panel class for displaying trajectory graphs. This class is typically launched via the Player Toolbar.

Graphs are either:

  1. Indexed by frame number (ex. Polar Surface Area for each frame). These are displayed in the main panel view.

  2. Indexed by atom/residue (ex. Residue RMSF over all residues selected) These can be viewed in the advanced graphs section at the bottom.

Variables

  • displayAsl – Display the asl for the corresponding entry id Signal. args are (asl, entry_id)

  • displayFrameAndAsl – Change frame and show ASL for given entry id Signal args are (asl, entry_id, frame_number)

model_class

alias of schrodinger.trajectory.trajectory_gui_dir.traj_plot_models.TrajPlotModel

ui_module = <module 'schrodinger.trajectory.trajectory_gui_dir.traj_plot_ui' from '/scr/buildbot/savedbuilds/2022-1/NB/build-139/internal/lib/python3.8/site-packages/schrodinger/trajectory/trajectory_gui_dir/traj_plot_ui.py'>
createPlot
trajectoryChanged
displayFrameAndAsl
displayAsl
__init__(dockarea=None, **kwargs)[source]
initSetOptions()[source]

Suggested subclass use: set instance variables, excluding layouts and subwidgets. Also use here to (optionally) apply the legacy stylesheet spacing settings (PANEL-19101).

initSetUp()[source]

Creates widget from ui and stores it ui_widget.

Suggested subclass use: create and initialize subwidgets, and connect signals.

initLayout()[source]
getSignalsAndSlots(model)[source]

Override this method to specify signal and slot pairs that need to be connected/disconnected whenever the model instance is switched using setModel. The model instance is provided as an argument so that instance-specific signals can be used, but any pairs of signals and slots may be returned from this method.

Returns

a list of 2-tuples where each tuple is a signal, slot pair

defineMappings()[source]

Override this in the subclass to define mappings. Should return a list of tuples [(<target>, <param>)]. Targets can be:

  1. a basic widget, like QLineEdit or QComboBox

  2. a custom object that inherits MapperMixin or TargetMixin

  3. a TargetSpec instance

  4. a slot

For common widgets, standard signals and getter/setter methods will be used, as defined in mappers._get_default_access_names().

For more fine-grained custom control, instantiate a TargetSpec object, which allows custom setters, getters, and signals to be specified.

Supplying a slot as the first element of the tuple is equivalent to providing TargetSpec(slot=my_slot).

Note that all target slots are triggered on setModel() as well as in response to the specified signal.

The param is an abstract param reference, e.g. MyModel.my_param.

Example:

def defineMappings(self):
    combo = self.style_combo
    return [(self.name_le, MyModel.name),
            (TargetSpec(combo,
                    getter=combo.currentText,
                    setter=combo.setCurrentText), MyModel.style),
            (self.coord_widget, MyModel.coord),
            (self._onASLTextChanged, MyModel.asl_text)]
event(event)[source]

Make sure that scrolling doesn’t cause Workspace zoom.

See Qt documentation for argument documentation.

plotAlreadyExists(analysis_mode, cms_fpath, asl=None, settings_hash=None)[source]

Check if a plot already exists for a specified trajectory.

Parameters

  • analysis_mode (traj_plot_moodel.AnalysisMode) – Analysis mode of plot to be checked

  • cms_fpath (str) – CMS output file for the plot trajectory

  • asl (str) – Optional ASL for the specified plot

  • settings_hash (str) – Optional hash string to identify unique plots beyond analysis mode and fit ASL.

Returns

True if the specified plot already exists, False otherwise.

Return type

bool

createTrajectoryPlot(plot_type)[source]

Starts the creation of a plot to be displayed in the panel. Shows the panel.

Parameters

plot_type – Type of plot for the panel to create and display

Type

PlotType

updateFsysCt(frame_number)[source]

Updates the entry trajectory’s fsys_ct structure coordinates at the frame provided

Parameters

frame_number (int) – frame number of trajectory

Returns

A copy of the frame CT

Return type

cms.Cms

createEnergyPlotForSets(sets)[source]

Submit a TrajectoryEnergyJobTask for given sets. A plot window will be created when the job completes.

Parameters

sets (dict) – Dict where keys are set names and values are ASLs.

showRmsdSettingsDialog()[source]

Shows the RMSD Settings Dialog

showEnergySettingsDialog()[source]

Jow energy job settings dialog in modal mode.

createPlotWidget(task)[source]

Create a new plot widget from results of the specified task.

Parameters

task (tasks.AbstractTask) – Completed trajectory task

Returns

Plot object.

Return type

tplots.CollapsiblePlot

countPlotsOfType(mode)[source]

Count the number of plots with the given type that are present.

addWorkspaceMeasurements()[source]

Opens the workspace measurement banner, allowing the user to add measurements

getPlotCount()[source]
Returns

The current plots count

Return type

int

deletePlotsForEntry(eid)[source]

Remove plots associated with the specified entry id.

Parameters

eid (int) – Entry ID to remove the plots of.

onCurrentFrameChanged(frame)[source]
showPlotWarning(msg)[source]

Show the given text in a warning dialog, with dialog title set to “Cannot Display Plot” instead of the standard “Warning” title.

APPLY_LEGACY_STYLESHEET = True
AllDockWidgetFeatures = 7
class BtnPos(value)

Bases: enum.IntEnum

An enumeration.

Left = 0
Middle = 1
Right = 2
DockWidgetClosable = 1
class DockWidgetFeature

Bases: int

class DockWidgetFeatures
class DockWidgetFeatures(Union[QDockWidget.DockWidgetFeatures, QDockWidget.DockWidgetFeature]) → None
class DockWidgetFeatures(QDockWidget.DockWidgetFeatures) → None

Bases: sip.simplewrapper

__init__(*args, **kwargs)
DockWidgetFloatable = 4
DockWidgetMovable = 2
DockWidgetVerticalTitleBar = 8
DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
NoDockWidgetFeatures = 0
PRESETS_FEATURE_FLAG = False
class PaintDeviceMetric

Bases: int

PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag

Bases: int

class RenderFlags
class RenderFlags(Union[QWidget.RenderFlags, QWidget.RenderFlag]) → None
class RenderFlags(QWidget.RenderFlags) → None

Bases: sip.simplewrapper

__init__(*args, **kwargs)
SHOW_AS_WINDOW = True
class StdBtn(value)

Bases: enum.IntEnum

An enumeration.

Ok = 0
Cancel = 1
Reset = 2
Help = 3
acceptDrops(self) → bool
property accepted
accessibleDescription(self) → str
accessibleName(self) → str
actionEvent(self, QActionEvent)
actions(self) → List[QAction]
activateWindow(self)
addAction(self, QAction)
addActions(self, Iterable[QAction])
adjustSize(self)
allowedAreas(self) → Qt.DockWidgetAreas
allowedAreasChanged

allowedAreasChanged(self, Union[Qt.DockWidgetAreas, Qt.DockWidgetArea]) [signal]

autoFillBackground(self) → bool
backgroundRole(self) → QPalette.ColorRole
baseSize(self) → QSize
blockSignals(self, bool) → bool
changeEvent(self, QEvent)
childAt(self, QPoint) → QWidget
TrajAnalysisPlotPanel.childAt(self, int, int) -> QWidget
childEvent(self, QChildEvent)
children(self) → List[QObject]
childrenRect(self) → QRect
childrenRegion(self) → QRegion
clearFocus(self)
clearMask(self)
close(self) → bool
closeEvent(event)

Do not close the floating python panel and instead emit a SIGNAL to Maestro which redocks the panel back into main window. This is a temporary workaround for Qt5 redock issues

colorCount(self) → int
connectNotify(self, QMetaMethod)
contentsMargins(self) → QMargins
contentsRect(self) → QRect
contextMenuEvent(self, QContextMenuEvent)
contextMenuPolicy(self) → Qt.ContextMenuPolicy
create(self, window: PyQt5.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(QWindow, parent: QWidget = None, flags: Union[Qt.WindowFlags, Qt.WindowType] = 0) → QWidget
cursor(self) → QCursor
customContextMenuRequested

customContextMenuRequested(self, QPoint) [signal]

customEvent(self, QEvent)
debug()
deleteLater(self)
depth(self) → int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: QObject = None) [signal]

devType(self) → int
devicePixelRatio(self) → int
devicePixelRatioF(self) → float
devicePixelRatioFScale() → float
disconnect(QMetaObject.Connection) → bool
disconnect(self) → None
disconnectNotify(self, QMetaMethod)
dockLocationChanged

dockLocationChanged(self, Qt.DockWidgetArea) [signal]

dragEnterEvent(self, QDragEnterEvent)
dragLeaveEvent(self, QDragLeaveEvent)
dragMoveEvent(self, QDragMoveEvent)
dropEvent(self, QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) → List[QByteArray]
effectiveWinId(self) → PyQt5.sip.voidptr
ensurePolished(self)
enterEvent(self, QEvent)
error(*args, **kwargs)

Shows a popup error message box. For parameter documentation see messagebox.MessageBox.

eventFilter(self, QObject, QEvent) → bool
features(self) → QDockWidget.DockWidgetFeatures
featuresChanged

featuresChanged(self, Union[QDockWidget.DockWidgetFeatures, QDockWidget.DockWidgetFeature]) [signal]

find(PyQt5.sip.voidptr) → QWidget
findChild(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChild(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → QObject
findChildren(self, type, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, name: str = '', options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegExp, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, type, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
findChildren(self, Tuple, QRegularExpression, options: Union[Qt.FindChildOptions, Qt.FindChildOption] = Qt.FindChildrenRecursively) → List[QObject]
focusInEvent(self, QFocusEvent)
focusNextChild(self) → bool
focusNextPrevChild(self, bool) → bool
focusOutEvent(self, QFocusEvent)
focusPolicy(self) → Qt.FocusPolicy
focusPreviousChild(self) → bool
focusProxy(self) → QWidget
focusWidget(self) → QWidget
font(self) → QFont
fontInfo(self) → QFontInfo
fontMetrics(self) → QFontMetrics
foregroundRole(self) → QPalette.ColorRole
forgetMessageBoxResponse(key)

Forgets any previously saved response that was stored via a save_response_key.

Parameters

key – the key for the response to forget

frameGeometry(self) → QRect
frameSize(self) → QSize
geometry(self) → QRect
getContentsMargins(self) → Tuple[int, int, int, int]
getModel()
classmethod getPanelInstance(create=True)

Return the singleton instance of this panel, creating one if necessary.

Parameters

create (bool) – Whether to create an instance of the panel if none exists

Returns

instance of this panel.

Return type

PanelMixin

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) → QPixmap
grabGesture(self, Qt.GestureType, flags: Union[Qt.GestureFlags, Qt.GestureFlag] = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, Union[QCursor, Qt.CursorShape]) → None
grabShortcut(self, Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) → int
graphicsEffect(self) → QGraphicsEffect
graphicsProxyWidget(self) → QGraphicsProxyWidget
hasFocus(self) → bool
hasHeightForWidth(self) → bool
hasMouseTracking(self) → bool
hasTabletTracking(self) → bool
height(self) → int
heightForWidth(self, int) → int
heightMM(self) → int
hide(self)
hideEvent(self, QHideEvent)
info(*args, **kwargs)

Shows a popup information message box. For parameter documentation see messagebox.MessageBox.

inherits(self, str) → bool
initFinalize()

Suggested subclass use: perform any remaining initialization.

initLayOut()

@overrides: widgetmixins.InitMixin

initPainter(self, QPainter)
initSetDefaults()

@overrides: widgetmixins.InitMixin

initStyleOption(self, QStyleOptionDockWidget)
inputMethodEvent(self, QInputMethodEvent)
inputMethodHints(self) → Qt.InputMethodHints
inputMethodQuery(self, Qt.InputMethodQuery) → Any
TrajAnalysisPlotPanel.insertAction(self, QAction, QAction)
insertActions(self, QAction, Iterable[QAction])
installEventFilter(self, QObject)
isActiveWindow(self) → bool
isAncestorOf(self, QWidget) → bool
isAreaAllowed(self, Qt.DockWidgetArea) → bool
isEnabled(self) → bool
isEnabledTo(self, QWidget) → bool
isFloating(self) → bool
isFullScreen(self) → bool
isHidden(self) → bool
isLeftToRight(self) → bool
isMaximized(self) → bool
isMinimized(self) → bool
isModal(self) → bool
isRightToLeft(self) → bool
isSignalConnected(self, QMetaMethod) → bool
isVisible(self) → bool
isVisibleTo(self, QWidget) → bool
isWidgetType(self) → bool
isWindow(self) → bool
isWindowModified(self) → bool
isWindowType(self) → bool
keyPressEvent(self, QKeyEvent)
keyReleaseEvent(self, QKeyEvent)
keyboardGrabber() → QWidget
killTimer(self, int)
layout(self) → QLayout
layoutDirection(self) → Qt.LayoutDirection
leaveEvent(self, QEvent)
locale(self) → QLocale
logicalDpiX(self) → int
logicalDpiY(self) → int
lower(self)
makeInitialModel()
mapFrom(self, QWidget, QPoint) → QPoint
mapFromGlobal(self, QPoint) → QPoint
mapFromParent(self, QPoint) → QPoint
mapTo(self, QWidget, QPoint) → QPoint
mapToGlobal(self, QPoint) → QPoint
mapToParent(self, QPoint) → QPoint
mappedParams()

Return a list of the abstract params that are mapped to.

mask(self) → QRegion
maximumHeight(self) → int
maximumSize(self) → QSize
maximumWidth(self) → int
metaObject(self) → QMetaObject
metric(self, QPaintDevice.PaintDeviceMetric) → int
minimumHeight(self) → int
minimumSize(self) → QSize
minimumSizeHint(self) → QSize
minimumWidth(self) → int
property model
mouseDoubleClickEvent(self, QMouseEvent)
mouseGrabber() → QWidget
mouseMoveEvent(self, QMouseEvent)
mousePressEvent(self, QMouseEvent)
mouseReleaseEvent(self, QMouseEvent)
move(self, QPoint)
TrajAnalysisPlotPanel.move(self, int, int) -> None
moveEvent(self, QMoveEvent)
moveToThread(self, QThread)
nativeEvent(self, Union[QByteArray, bytes, bytearray], sip.voidptr) → Tuple[bool, int]
nativeParentWidget(self) → QWidget
nextInFocusChain(self) → QWidget
normalGeometry(self) → QRect
objectName(self) → str
objectNameChanged

objectNameChanged(self, str) [signal]

overrideWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
overrideWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
paintEngine(self) → QPaintEngine
paintEvent(self, QPaintEvent)
paintingActive(self) → bool
palette(self) → QPalette
classmethod panel(blocking=False, modal=False, finished_callback=None)

Open an instance of this class.

For full argument documentation, see ExecutionMixin.run.

parent(self) → QObject
parentWidget(self) → QWidget
physicalDpiX(self) → int
physicalDpiY(self) → int
pos(self) → QPoint
previousInFocusChain(self) → QWidget
property(self, str) → Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

pythonPanelAboutToBeClosed
question(*args, **kwargs)

Shows a popup question message box. For parameter documentation see messagebox.QuestionMessageBox.

raise_(self)
receivers(self, PYQT_SIGNAL) → int
reconfigureDockWidget
rect(self) → QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, int)
removeAction(self, QAction)
removeEventFilter(self, QObject)
render(self, QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.RenderFlag.DrawWindowBackground | QWidget.RenderFlag.DrawChildren))
render(self, QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: Union[QWidget.RenderFlags, QWidget.RenderFlag] = QWidget.RenderFlags(QWidget.RenderFlag.DrawWindowBackground | QWidget.RenderFlag.DrawChildren)) → None
repaint(self)
TrajAnalysisPlotPanel.repaint(self, int, int, int, int) -> None
repaint(self, QRect) → None
repaint(self, QRegion) → None
reportValidation(results)

Present validation messages to the user. This is an implmentation of the ValidationMixin interface and does not need to be called directly.

This method assumes that error and question methods have been defined in the subclass, as in e.g. widget_mixins.MessageBoxMixin.

Parameters

results (validation.ValidationResults) – Set of validation results generated by validate

Returns

if True, there were no validation errors and the user decided to continue despite any warnings. If False, there was at least one validation error or the user decided to abort when faced with a warning.

resetMappedParams()
resize(self, QSize)
TrajAnalysisPlotPanel.resize(self, int, int) -> None
resizeEvent(self, QResizeEvent)
restoreGeometry(self, Union[QByteArray, bytes, bytearray]) → bool
run(blocking=False, modal=False, finished_callback=None)

Show this widget, while optionally blocking, making the widget window modal, and registering a callback for when the widget is closed again.

Parameters

  • blocking (bool) – if True, block progress in the calling method until the widget is closed again.

  • modal (bool) – if True, open this widget as window modal. Otherwise, open this widget as nonmodal.

  • finished_callback (a callable object) – an object that will be called with no arguments when this widget is closed.

runAllSlots()
runValidation(silent=False, validate_children=True, stop_on_fail=True)

Runs validation and reports the results (unless run silently).

Parameters

  • silent (bool) – run without any reporting (i.e. error messages to the user). This is useful if we want to programmatically test validity. Changes return value of this method from ValidationResults to a boolean.

  • validate_children (bool) – run validation on all child objects. See _validateChildren for documentation on what this entails.

  • stop_on_fail (bool) – stop validation when first failure is encountered

Returns

if silent is False, returns the validation results. If silent is True, returns a boolean generated by reportValidation.

Return type

ValidationResults or bool

saveGeometry(self) → QByteArray
TrajAnalysisPlotPanel.scroll(self, int, int)
TrajAnalysisPlotPanel.scroll(self, int, int, QRect) -> None
sender(self) → QObject
senderSignalIndex(self) → int
setAcceptDrops(self, bool)
setAccessibleDescription(self, str)
setAccessibleName(self, str)
setAllowedAreas(self, Union[Qt.DockWidgetAreas, Qt.DockWidgetArea])
setAttribute(self, Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, bool)
setBackgroundRole(self, QPalette.ColorRole)
TrajAnalysisPlotPanel.setBaseSize(self, int, int)
setBaseSize(self, QSize) → None
TrajAnalysisPlotPanel.setContentsMargins(self, int, int, int, int)
setContentsMargins(self, QMargins) → None
setContextMenuPolicy(self, Qt.ContextMenuPolicy)
setCursor(self, Union[QCursor, Qt.CursorShape])
setDefaults()

@overrides: af2.App

setDisabled(self, bool)
setEnabled(self, bool)
setFeatures(self, Union[QDockWidget.DockWidgetFeatures, QDockWidget.DockWidgetFeature])
setFixedHeight(self, int)
setFixedSize(self, QSize)
TrajAnalysisPlotPanel.setFixedSize(self, int, int) -> None
setFixedWidth(self, int)
setFloating(self, bool)
setFocus(self)
setFocus(self, Qt.FocusReason) → None
setFocusPolicy(self, Qt.FocusPolicy)
setFocusProxy(self, QWidget)
setFont(self, QFont)
setForegroundRole(self, QPalette.ColorRole)
setGeometry(self, QRect)
TrajAnalysisPlotPanel.setGeometry(self, int, int, int, int) -> None
setGraphicsEffect(self, QGraphicsEffect)
setHidden(self, bool)
setInputMethodHints(self, Union[Qt.InputMethodHints, Qt.InputMethodHint])
setLayout(self, QLayout)
setLayoutDirection(self, Qt.LayoutDirection)
setLocale(self, QLocale)
setMask(self, QBitmap)
setMask(self, QRegion) → None
setMaximumHeight(self, int)
TrajAnalysisPlotPanel.setMaximumSize(self, int, int)
setMaximumSize(self, QSize) → None
setMaximumWidth(self, int)
setMinimumHeight(self, int)
TrajAnalysisPlotPanel.setMinimumSize(self, int, int)
setMinimumSize(self, QSize) → None
setMinimumWidth(self, int)
setModel(model)

Sets the model object for the mapper. Disconnects the old model, if one is set, and connects the new model. Pass in None to have no model set.

Parameters

model – the model instance or None

setModelWithoutSlots(model)

This is called when this MapperMixin is a sub-widget of a parent MapperMixin. Since the slots will all be called at the end of the parent setModel, they shouldn’t be called during the sub-widget’s setModel.

setMouseTracking(self, bool)
setObjectName(self, str)
setPalette(self, QPalette)
setParent(self, QWidget)
setParent(self, QWidget, Union[Qt.WindowFlags, Qt.WindowType]) → None
setProperty(self, str, Any) → bool
setShortcutAutoRepeat(self, int, enabled: bool = True)
setShortcutEnabled(self, int, enabled: bool = True)
TrajAnalysisPlotPanel.setSizeIncrement(self, int, int)
setSizeIncrement(self, QSize) → None
setSizePolicy(self, QSizePolicy)
setSizePolicy(self, QSizePolicy.Policy, QSizePolicy.Policy) → None
setStatusTip(self, str)
setStyle(self, QStyle)
setStyleSheet(self, str)
TrajAnalysisPlotPanel.setTabOrder(QWidget, QWidget)
setTabletTracking(self, bool)
setTitleBarWidget(self, QWidget)
setToolTip(self, str)
setToolTipDuration(self, int)
setUpdatesEnabled(self, bool)
setVisible(self, bool)
setWhatsThis(self, str)
setWidget(self, QWidget)
setWidgetLayout()

Set the widget layout. A QDockWidget’s layout does not allow nested layouts so we create a container widget to hold the widget layout.

setWindowFilePath(self, str)
setWindowFlag(self, Qt.WindowType, on: bool = True)
setWindowFlags(self, Union[Qt.WindowFlags, Qt.WindowType])
setWindowFlagsForRun()

Don’t set any window flags for run

setWindowIcon(self, QIcon)
setWindowIconText(self, str)
setWindowModality(self, Qt.WindowModality)
setWindowModified(self, bool)
setWindowOpacity(self, float)
setWindowRole(self, str)
setWindowState(self, Union[Qt.WindowStates, Qt.WindowState])
setWindowTitle(self, str)
setting_model()
setupDockWidget
sharedPainter(self) → QPainter
show()

Override the show method to clear and previous value of self.accepted

showEvent(self, QShowEvent)
showFullScreen(self)
showMaximized(self)
showMessageBox(*args, **kwargs)

Shows a popup message box. For parameter documentation see messagebox.MessageBox.

showMinimized(self)
showNormal(self)
signalsBlocked(self) → bool
size(self) → QSize
sizeHint(self) → QSize
sizeIncrement(self) → QSize
sizePolicy(self) → QSizePolicy
stackUnder(self, QWidget)
startTimer(self, int, timerType: Qt.TimerType = Qt.CoarseTimer) → int
staticMetaObject = <PyQt5.QtCore.QMetaObject object>
statusTip(self) → str
style(self) → QStyle
styleSheet(self) → str
tabletEvent(self, QTabletEvent)
testAttribute(self, Qt.WidgetAttribute) → bool
thread(self) → QThread
timerEvent(self, QTimerEvent)
titleBarWidget(self) → QWidget
toggleViewAction(self) → QAction
toolTip(self) → str
toolTipDuration(self) → int
topLevelChanged

topLevelChanged(self, bool) [signal]

tr(self, str, disambiguation: str = None, n: int = - 1) → str
underMouse(self) → bool
ungrabGesture(self, Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, QRect) → None
update(self, QRegion) → None
TrajAnalysisPlotPanel.update(self, int, int, int, int) -> None
updateGeometry(self)
updateMicroFocus(self)
updatesEnabled(self) → bool
visibilityChanged

visibilityChanged(self, bool) [signal]

visibleRegion(self) → QRegion
warning(*args, **kwargs)

Shows a popup warning message box. For parameter documentation see messagebox.MessageBox.

whatsThis(self) → str
wheelEvent(self, QWheelEvent)
widget(self) → QWidget
width(self) → int
widthMM(self) → int
winId(self) → PyQt5.sip.voidptr
window(self) → QWidget
windowFilePath(self) → str
windowFlags(self) → Qt.WindowFlags
windowHandle(self) → QWindow
windowIcon(self) → QIcon
windowIconChanged

windowIconChanged(self, QIcon) [signal]

windowIconText(self) → str
windowIconTextChanged

windowIconTextChanged(self, str) [signal]

windowModality(self) → Qt.WindowModality
windowOpacity(self) → float
windowRole(self) → str
windowState(self) → Qt.WindowStates
windowTitle(self) → str
windowTitleChanged

windowTitleChanged(self, str) [signal]

windowType(self) → Qt.WindowType
x(self) → int
y(self) → int